A gas precision separator is a device that uses physical barrier technology to separate other components in a medium; This separator is the main equipment used to filter solid particles, water droplets, oil mist and other aerosol impurities in the air, making the air clean.

The MGF series precision gas separator is one of the new generation air purification device series developed by our company based on mature filtration technology. This product is easy to operate and can effectively carry out gas dust removal, dehydration, and purification of impurities, making the filtered gas dry and clean to meet gas standards. By utilizing physical interception methods and the principles of glass fiber interception, collision, adsorption, etc., solid impurities, small dust, free moisture, oil mist, etc. in the air are intercepted and retained, improving the cleanliness of the gas and effectively protecting the cleanliness of subsequent gas components. The filter element uses a high flux air filter cartridge to remove aerosol impurities such as solid dust, water droplets, and oil mist from the air. Widely used in pneumatic instruments, pneumatic conveying, automatic control, and industries such as food, medicine, chemical, textile, petroleum, metallurgy, rubber, etc., the separation efficiency can reach 99.9%. This equipment is a filter cartridge type air separator designed and manufactured for the piping of Roots blower systems. This equipment is mainly used for dust removal, removing water vapor from the air, etc., to protect the cleanliness of the air in the fan system. The equipment uses an air filter cartridge as the filtering element inside, with a large diameter single air filter, high air flux, low pressure loss, and a folded filter material with a large filtering area. The exterior adopts a fully sealed cylinder body, with no leakage and guaranteed filtration accuracy.

Characteristics of the separator:

Schematic diagram of separator

Size diagram of separator

Selection parameter table

Friendly reminder: The above are some models. Please contact us promptly if you have any special requirements!

When choosing a soda water separator, please consider the following parameters:

1. The above airflow data was measured at a wind pressure of 10kpa,

2. Initial resistance of the equipment: 150-200pa (pressure loss)

When selecting, attention should be paid to:

3. Consider handling traffic and choosing the appropriate caliber.

4. Consider the chemical properties of the filter medium, whether it contains corrosiveness, etc., and choose the material of the steam water separator.

5. Consider the temperature of the filter medium and choose a suitable drain valve or high-temperature drain valve.

6. Provide pipeline pressure, positive or negative pressure, automatic drain valve does not work under negative pressure conditions; Special attention should be paid when selecting.