METRONELEC ST88 Weldability Tester-Fornitore globale

Room 908, Building B, South Tower, Zhongzhou Center, Haizhu District, Guangzhou City, Guangdong Province

Introduction to METRONELEC ST88 Weldability Tester:

The METRONNELEC ST78/88 solderability tester is widely used in incoming inspection, factory inspection, process improvement, and experimental rate verification to quantitatively evaluate the solderability of tested samples such as electronic components, circuit boards, etc. It can test various types of samples in the electronics industry, including surface mount devices, connectors, and printed circuit boards. Its advanced testing technology avoids the influence of indirect testing and human factors to a certain extent, and the test results directly qualitatively and quantitatively evaluate the solderability of the tested samples, eliminating product quality problems caused by solderability and greatly improving product output and yield.

Features of METRONELEC ST88 Weldability Tester:

1. Fully automatic product positioning
2. Automatic quantitative analysis
3. Automatic removal of surface oxides
4. Tin balls can be selected for testing
5. Automatically call built-in standards such as IPC/IEC/MIL/FR
6. Users can customize standards
7. Corresponding fixtures can be selected for different devices
8. Can test 0201/01005 devices
9. Can simultaneously output wetting force and wetting angle
10. Standard ammonia module, which can be tested in an ammonia filled environment
11. Standard video capture module, capable of recording and taking photos during testing process
12. The software is available in multiple languages, including Chinese, English, French, and German
13. The software comes with a built-in database for easy parameter calling
14. Can evaluate the solderability of solder paste/flux

Testing Method for METRONELEC ST88 Weldability Tester:

ST-88 has two testing methods, standard: solder bath balance method; Optional: Solder ball method

METRONELEC ST88 Weldability Tester Specification Parameters:

sensor	Linearity of 0.1%, resolution of 1mg
invasion depth	You can choose before 0.1-9mm
Infiltration speed	1-50mm/s adjustable, 1mm/s adjustable per step
Exit speed	1-50mm/s adjustable, 1mm/s adjustable per step
temperature range	Room temperature -450 degrees Celsius
test method	tin bath
nitrogen	Standard configuration
Tin ball	1, 2, 4mm tin balls can be used
power supply	110v/220v

METRONELEC ST88 Weldability Tester Application Fields:

Various types of surface mount devices, plug-in devices, and printed circuit boards are tested on various samples.

Use of METRONELEC ST88 Weldability Tester:

The ST88 solderability tester (tin dipping balance/wetting balance) is easy to operate, and the test results can be displayed in the form of images or data through a computer. A user-friendly interface, easy to operate, intuitive result display, and test results directly reflect the solderability of the tested device. Mainly used for the solderability and solder paste characteristics of various plugins, components on PCB boards, through-hole components, SMD components, etc. The sensing speed of ST88 is fixed, and it does not immerse the sample into the solder alloy. Instead, it continues the immersion process by automatically lifting the sample in the direction of the small tin cylinder. This ensures more precise solderability testing of the components.