The plastic mixer and its purpose are as follows:
1. Jinnuo brand plastic particle mixer is used in the plastic industry for mixing plastic particles, making different plastics evenly mixed. It uses a reduction motor and prevents the plastic particle mixer from dissolving, evaporating or deteriorating the materials during the mixing process.
2. The barrel body is of a standing type, made of stainless steel, and is equipped with vertical stirring blades, which stand on the reducer.
3. The reversing reducer is located at the bottom and is driven by a motor with a worm gear installed in the machine base to rotate the mixing blade in the mixing bucket clockwise during operation, allowing the material to be discharged in one go.
4. The machine base and electric motor device are an integrated structure, with the electric motor installed at the bottom of the bucket. The electric motor directly drives the mixing blade to maintain the transmission force.
5. The box controls the movement of the machine and is located on the front right side. The transmission of the machine slot can press the "up" and "down" buttons of the plastic mixing machine, but be careful not to press both buttons at the same time.

The plastic mixer and its maintenance instructions:
1. Regularly inspect the components, 1-2 times a month, to check whether the worm, bearings, shaft seals and other moving parts rotate flexibly and wear out. If any defects are found, they should be repaired in a timely manner for normal use.
2. Electrical control components should be kept clean and sensitive, and any malfunctions should be promptly repaired.
3. After a single use or shutdown, the remaining materials should be removed from the plastic pellet mixer and the residual powder in each part of the machine should be brushed clean. If the machine is not in use for a long time, it must be wiped clean and covered with a tarpaulin.
4. The mixing blade of the plastic particle mixer should be disassembled, installed steadily, and placed gently to avoid deformation and damage.

The plastic mixer and its features:
1. Four wheel upright design, small size, easy to move.
2. Equipped with a cycloidal pinwheel reduction motor, it has low noise and durability.
3. Complete uniform mixing in a short period of time, with low energy consumption and high efficiency.
4. The lid and bottom of the barrel are stamped and formed with precision, making them more durable.
5. The timer can select the mixing time between 0-30 minutes.
6. The all stainless steel blade has a scientific and reasonable structure, which can fully stir the raw materials during operation and minimize the load, saving time.
7. Power saving; Made of high-quality stainless steel material, with high strength and easy cleaning.
After sales service: All equipment of our company comes with a one-year warranty and lifetime maintenance (excluding human factors and vulnerable parts).

1. The bucket blades are made of stainless steel, which is easy to clean and prevents rusting;
2. Four wheel upright, small size, easy to move;
3. Equipped with a cycloidal pinwheel motor, it has low noise and low durability;
4. Complete uniform mixing in a short period of time, with low energy consumption and high efficiency;
5. The lid and bottom of the barrel are stamped and formed with precision, making them more durable;
6. Chain safety protection devices ensure the safety of operators and machinery equipment;
7. The mixing time can be selected between 0 and 30 minutes.

Technical parameters of the plastic mixer and plastic mixer: