This integrated system includes a fully automatic lifting cooling water tank system, a fully shaped feeding platform, a waste collection type feeding platform, and an integrated fixture gripper, all independently designed by Ruiyi Intelligence. During the production process, after the die-casting machine discharges the material, it is stably positioned on the full contour feeding platform to a fixed point. The robot holds the gripper to grab the parts and moves them to the cooling water tank, accurately placing them on the fixed fixture on the cooling water tank. The water tank uses a lifting mechanism to immerse the workpiece in water, complete the water cooling work, and lift the water out. The blowing system is turned on to remove the water stains left on the surface of the workpiece. The robot grabs the workpiece again, moves to further remove the water stains on the surface of the workpiece, and then places it on the feeding platform and returns to the gripping point. Repeat the above actions in a loop. The pure water in this cooling water tank system is stabilized at a temperature below 40 degrees through an automatically controlled water cooling circulation system, ensuring the cooling effect of the parts. And according to the detection, it can automatically replenish water and manually set the duration of various controls.