Liquid tank high-efficiency filters are widely used filtration equipment in industrial cleanrooms and biological cleanrooms. Liquid tank sealing is a method of sealing that is superior to commonly used mechanical compression devices. The liquid tank sealed filter is easy to install and has a very reliable seal, making its final filtration effect better than ordinary high-efficiency filters. The liquid tank high-efficiency filter changes the traditional sealing mode and takes industrial purification to a new level.

The difference between liquid tank high-efficiency filter and non partition high-efficiency filter：

Its appearance is different: the liquid tank high-efficiency filter has an additional liquid tank edge compared to the non partition high-efficiency filter
The filtration area is different: the filtration area of high-efficiency filters with the same size of liquid tanks is lower than that of high-efficiency filters without partitions. The high-efficiency filter of the liquid tank is surrounded by liquid tank edges, so the filtration area in the middle of the high-efficiency filter is reduced
The installation and sealing are different: the high-efficiency without partition is sealed between the sealing strip on the inlet or outlet surface and the box, while the high-efficiency filter in the liquid tank is sealed between the liquid tank adhesive and the box by the edge of the liquid tank, which has a good sealing effect
The price and cost are different: it is precisely because the liquid tank filter has an additional liquid tank edge, and the injected liquid tank glue is a higher cost raw material, that the price of the liquid tank high-efficiency filter is higher than that of the non partition high-efficiency filter.

Advantages of high-efficiency air supply outlet for liquid tank:

1. The air supply port of the liquid tank adopts a knife edge type and is inserted into the jelly glue of the liquid tank filter to maintain sealing, preventing exhaust leakage from the installation gap. It can be tested for consistency according to DOP dust emission at once;

2. Install 2 DOP connectors on the liquid tank air supply outlet, one for dust emission and one for inspection, making it convenient for customers to conduct DOP dust emission inspection and detect the pressure difference of high-efficiency filters at the inlet of the filter. The plastic hose connected under the quick release connector extends to the bottom of the housing to ensure that the dust concentration values upstream and downstream of the filter are evenly distributed;

3. Rotary pressure block, convenient for filter performance and quick disassembly and replacement; The sealing of the liquid tank ensures that there is no leakage when replacing the filter.