Lightweight Plate Feeding Machine/Introduction

Lightweight plate feederIt is a type of continuous material conveying machinery widely used in industries such as non-ferrous metals, mining, cement, chemical and metallurgical industries. Used for continuously and uniformly distributing and transporting materials to crushers, conveyors, or production line equipment in a horizontal or inclined direction, suitable for loose, blocky, and high-volume feeding processes in large and medium-sized cement plant production lines. It can transport large blocks and work reliably in high-temperature, high humidity, and harsh environments, especially suitable for transporting large, high-temperature, and sharp materials, and can work reliably in outdoor and humid environments.

Plate feederIt can be divided into three types: light plate feeder, medium plate feeder, and heavy plate feeder. Suitable for continuous and uniform distribution and transportation of bulk density from the storage bin to the crusher conveyor or other working machinery and containers along horizontal or inclined line segments, respectively
Light aircraft refer to various block, granular, and loose materials with a weight not exceeding 120Okg/m3, a block weight not exceeding 140kg, and a temperature not exceeding 350 ℃.
Medium sized machines are used for various loose materials with a weight not exceeding 2400 kg/m3, a block weight not exceeding 50Okg, and a temperature not exceeding 400 ℃.
The specifications of heavy-duty plate feeders include slot widths of 1000, 1250, 1500, 2000, and millimeters, with a capacity of 60-200 cubic meters per hour.


Performance characteristics:

1. The plate feeder adopts two-point support, with one end directly placed on the crusher, making the process layout simple and saving civil engineering costs;
2. The tail device of the plate feeder adopts a special design, suitable for rainy and humid areas, and will not cause chain jumping due to the accumulation of sticky and wet materials at the tail, thereby affecting production;
3. The tail of the feeder is equipped with sleepers to absorb impact, and the middle part is supported by a certain amount of special shock-absorbing silver, which can improve the stress conditions on the large material impact wheel and groove plate, and increase the service life of the operating components;
4. The left and right sides of the machine head cover and lower cover have been specially reinforced to avoid hindering the lifting of the crusher rotor body;
5. Separating the lead chain from the load chain results in lower dynamic loads and increased lifespan;
6. The sprocket of the head device has 13-15 teeth, driven by odd and even teeth respectively, and its lifespan can be doubled;
7. The sprocket of the head device is cut into 3 teeth, which can be replaced without disassembling the chain plate, making it easy to maintain.

Light plate feeder/Photo taken

Lightweight plate feeder/principle

apron feederIt is to harness the power of the electric motor throughcouplingandreducerDrive the sprocket shaft to rotate, mesh with the chain pin shaft through the sprocket teeth, and drag the chain plate for continuous linear motion. The chain plate is installed on the frameThe supporting wheel and sprocket are supported, and the chain is correctly engaged with the sprocket by adjusting the tensioning device to achieve the purpose of conveying and feeding materials.

Lightweight Plate Feeding Machine/Technical Parameters