The entire operation of the laser dust purifier is controlled by a PLC control system, and all functional controls and information displays are completed by a control panel with control buttons and a display screen. The operation panel is designed to be user-friendly and easy to use.

The control system monitors and analyzes multiple important parameters during equipment operation in real time, displays them on the screen, and has automatic diagnostic functions to automatically display abnormal and erroneous states of equipment operation. These functions can keep the equipment in good operating condition and extend its service life.

During the operation of the purification system, harmful smoke and dust enter the purification system through the suction duct. The filter screen at the inlet of the purification system is made of stainless steel mesh sintered polytetrafluoroethylene membrane filter material.

The filter element of the laser smoke purifier is made of imported PTFE microporous membrane filter material, which has high filtration accuracy and can filter smoke particles up to 0.1um. According to the working intensity and smoke volume of the purifier, the service life of the filter element varies. In different situations, the corresponding indicator lights on the operation panel will light up to prompt, and it is equipped with automatic shutdown when the temperature is too high and automatic blowback when the pressure difference is too high.

The laser soot purifier has three power configurations to choose from based on the amount of soot, and the motor powers are:1.5KW /2.2KW /3.0KW； The processing air intake volume is 3000 cubic meters per hour,3600 cubic meters per hour, 6000 cubic meters per hour