Teflon sintering is poly (tetrafluoroethylene)An important step in the molding process of polytetrafluoroethylene products, which will cause fundamental changes in the performance of polytetrafluoroethylene products. The different process conditions such as sintering temperature and cooling rate directly affect the molecular weight, crystallinity, and porosity of the product. And these three factors also affect the physical, mechanical, and electrical properties of the product. At the same time, the quality of the sintering process also affects the magnitude and distribution of residual stresses in the product. Therefore, improper control of the sintering process will lead to product warping, deformation, and cracking. The PTFE sintering furnace produced by our company has good temperature uniformity, high automatic program control, and stable performance, making it an ideal specialized equipment for sintering PTFE products.

Performance characteristics:

1. High temperature uniformity: Imported high-precision 6-channel or 12 channel temperature monitoring recorders can be configured according to customer needs, displaying and recording the actual working temperature of each point in the furnace throughout the process.

2. High temperature control accuracy: The main temperature control adopts an intelligent program temperature controller, which can program multiple segments, with PID self-tuning, SSR solid-state relay+frequency controller power adjustment, and automatically completes the entire sintering process; Tunnel type sintering furnace can be divided into multiple temperature zones for temperature control, making the temperature in the entire working room more uniform; During the cooling process, the temperature can be lowered according to the process curve program. The sintering furnace is equipped with a cooling fan, and the air inlet automatically controls the opening angle of the air door. The air outlet is equipped with a fully automatic exhaust valve. The entire oven operation is controlled by PLC, and the sintering process is fully automated.

3. Reliable quality stability: The blower motor, impeller, and electric heating are all made of high-temperature resistant materials, which can adapt to continuous operation 24 hours a day without stopping. The quality is stable and reliable, with low noise and no shaking of the furnace body.

4. Convenient maintenance and repair: Parts such as fans and electric heaters are standardized and modularized according to different sintering furnace structures to make fault diagnosis more accurate, and parts maintenance is more convenient, timely, and cost-effective.

5. This equipment is a highly uniform and reliable sintering furnace specially designed and manufactured based on the extremely high requirements for uniformity in the furnace during polytetrafluoroethylene sintering. It is widely used for pre sintering, sintering, and shaping of polytetrafluoroethylene rods, plates, pipes, and powders.

Technical Parameters (Example Introduction)

Studio size: deep1000mm, wide1200mm, high1500mm can be customized to any size
Studio Material:SUS304#Stainless steel plate production, sheet metal bending, argon arc welding. (Multiple materials to choose from)
Temperature uniformity: positive or negative3℃ (no load constant temperature)20The minute test shall prevail
Outer wall material: Made of high-quality materialsA3#Cold steel plate production, sheet metal bending, welding, and surface coating with environmentally friendly paint
Working temperature: room temperature~500℃
(Temperature can be adjusted freely)1Temperature control accuracy: positive or negative
℃Temperature control method:PIDDual digital intelligent temperature control, over temperature protection device, set value and measured valueLEDEven number display,SSR
Solid state outputPower supply voltage:380V(Three phase four wire)
, 50HZHeating equipment: using covered dust-free stainless steelU5Type tubular heating element, with a service life of up to
Over 10000 hoursHeating power:
24KW
Air supply method: Double duct strong pressure convection horizontal circulation air supplyAir supply device:750W*2
The oven is equipped with a high-temperature resistant long axis motor and multi blade centrifugal fan blades, which forces the hot air to circulate rapidly and achieve uniform temperature 1Timing device:second~99.9
Hourly constant temperature timing, selectable timing method, automatically cuts off heating and beeps an alarm when the time is up
Factory accessories: configured according to customer needs 1Optional accessories:The number of small cars can be increased or the number of compartments can be increased or decreased; Stainless steel mesh shelves and trays can be added. Other specifications: Various sizes and functions of ovens (electric heating equipment) can be customized according to the actual needs of users/

Drying oven)