LS590 series servo drive-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

Xiongzhou Industrial Park, Liuhe District, Nanjing City, Jiangsu Province

Contact Now

LS590 series servo drive

The LS590 series servo drive is a servo drive specially developed for driving permanent magnet servo motors. It is equipped with optimized process act

Contact Supplier

More Products

Product details

¥Product Introduction

The LS590 series servo drive is an upgraded product of the LS100 series, specifically developed for driving permanent magnet servo motors (PMSM). It achieves high-performance vector control of permanent magnet synchronous motors and is equipped with optimized process action characteristics for injection molding machine driving, such as injection speed, pressure maintenance accuracy control, and stability control when working in conjunction with the injection molding machine controller. It perfectly realizes servo oil pump control. Compared with traditional injection molding machine driving methods, it has significant energy saving effects and can also meet the requirements of general servo functions. It is currently the most cost-effective and stable servo drive in the market. Mainly used in industries such as plastic molding, pipe extrusion, shoemaking, rubber, and metal die-casting.

¥Product Features

Project		Specifications
basic function	Highest frequency	300Hz
	carrier frequency	1kHz～8kHzAccording to the load characteristics, the carrier frequency can be automatically adjusted
	Input frequency resolutionrate	Number setting:0.01Hz;Simulation setting: maximum frequency x0.1%
	Control method	Closed-loop vector control（VC）TheV/Fcontrol
	Starting torque	0Hz/180%（VC）
	speed regulation range	1:1000（VC）
	Steady speed accuracy	±0.02%（VC）
	Torque control accuracy	±5%（VC）
	overload capacity	150%Rated output current60s；180%Rated output current3s.
	Automatic voltage adjustment （AVR）	When the voltage of the power grid changes, it can automatically maintain a constant output voltage.
protection function	protection function	Short circuit detection for power on motors, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheating protection, overload protection, etc.
environment	Usage location	Indoor, not exposed to direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, dripping or salt, etc.
	altitude	below1000m
	ambient temperature	－10℃～＋40℃The ambient temperature is40℃～50℃Please reduce the usage amount
	humidity	less than95%RHNo condensation of water droplets
	vibration	less than5.9m/s2（0.6g）
	Storage temperature	－20℃～＋60℃
	IPProtection level	IP20

¥Performance Characteristics

Project		Specifications
base this merit can	Highest frequency	300Hz
	carrier frequency	1kHz～8kHzAccording to the load characteristics, the carrier frequency can be automatically adjusted
	Input frequency resolutionrate	Number setting:0.01Hz;Simulation setting: maximum frequency x0.1%
	Control method	Closed-loop vector control（VC）TheV/Fcontrol
	Starting torque	0Hz/180%（VC）
	speed regulation range	1:1000（VC）
	Steady speed accuracy	±0.02%（VC）
	Torque control accuracy	±5%（VC）
	overload capacity	150%Rated output current60s；180%Rated output current3s.
	Automatic voltage adjustment（AVR）	When the voltage of the power grid changes, it can automatically maintain a constant output voltage.
protection function	protection function	Short circuit detection for power on motors, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheating protection, overload protection, etc.
environment	Usage location	Indoor, not exposed to direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, dripping or salt, etc.
	altitude	below1000m
	ambient temperature	－10℃～＋40℃The ambient temperature is40℃～50℃Please reduce the usage amount
	humidity	less than95%RHNo condensation of water droplets
	vibration	less than5.9m/s2（0.6g）
	Storage temperature	－20℃～＋60℃
	IPProtection level	IP20

¥LS590Naming convention for servo drives

modelLS590-***-		0075G	0110G	015G	0185G	0220G	0300G	0370G	0450G	0550G	0750G
Rated power（KW）		7.5	11	15	18.5	22	30	37	45	55	75
Output current（A)		17	25	32	37	45	60	75	91	112	150
Maximum holding current（A)continuous60S		25.5	37.5	48.0	55.5	67.5	90.0	112.5	136.5	168.0	225.0
power input	Rated voltage frequency	three-phase350，380，400，420，50/60Hz
	Allowable voltage fluctuation	10%~15%
	Allowable frequency fluctuation	±5%
Braking resistor (ratio)	W	built-in
Braking resistor (ratio)	Ω	built-in
resolverSignal cable (matching)		ZF80-****Represents cable length in centimeters. For example, ZF80-400 represents a cable length of 4 meters
pressure sensor(Essential)		Multiple pressure sensors can be selected, with corresponding parameters for range selectionA3-03,Range of pressure sensor, recommendeddanfoss 060G3557
circuit breaker		50	50	60	75	100	100	150	150	200	300
contactor		30	30	50	50	50	80	100	100	160	250

¥Product Outline Dimensional Drawing

¥mechanical parameters

Servo model	installation dimensions		Overall dimensions			mounting hole	weight
	A(mm)	B(mm)	W(mm)	H(mm)	D(mm)
LS590-0075G-T4	186	306	210	330.5	188	Ø9.5	7.8
LS590-0110G-T4
LS590-0150G-T4
LS590-0185G-T4
LS590-0220G-T4	238	396	260	420	196	Ø8.5	22.5
LS590-0300G-T4
LS590-0370G-T4
LS590-0450G-T4	295	495	320	515	255	Ø10	22.5
LS590-0550G-T4
LS590-0750G-T4

¥Appearance of the operation panel

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content