Professional Instrument Equipment and Testing Solution Supplier - JETYOO Industrial&Jianyou (Shanghai) Measuring Instrument Co., Ltd, a former Agilent product technical support engineer-Jian JETKEITHLEY Product Technology Application Engineer-RongyooA trade agency co founded in 2011 with a focus on technical support, aiming to break through the old and establish a new one! Fill the gap of most imported instrument and equipment manufacturers only setting up sales points in China, with weak or no technical support, and agent distributors only specializing in sales, not professional in pre-sales technical Q&A/testing plans, and not professional in after-sales training/maintenance calibration. Our technical sales engineers all have a bachelor's degree or above and over 10 years of experience in the testing industry. With our advanced and unique business philosophy, we specialize in providing instruments and equipment, testing solutions, technical training, and maintenance and measurement services to Chinese users. We are a leading company in the East China region of ShanghaiTechnology orientedA comprehensive service provider for instruments and equipment.

Japanese HIOKI3153 high-voltage insulation resistance testerPerformance characteristics

Programmable testing, fully remote control automatic insulation withstand voltage tester

Insulation resistance test (DC50V~1200V), withstand voltage test (AC/DC5000V), fully remote control

Programmable testing (32 files for testing programs, 50 steps for each file for testing points)

Generate precise test voltage through PWM control method

3930 high voltage scanning unit (optional)

The full specification insulation withstand voltage tester is equipped with all necessary functions for withstand voltage testing and insulation resistance testing

Fully remote control

AC withstand voltage test max.5kV

DC withstand voltage test max.5kV

Insulation resistance test max.1200V

Transformer capacitor 500VA

Equipped with a comprehensive tester, the maximum transformer capacitance is available

A model that integrates AC/DC withstand voltage and insulation testing, achieving a maximum capacity of 500VA for transformer capacitance withstand voltage: AC 5kV, 100mA withstand voltage: DC 5kV, 10mA Insulation resistance: DC 50V~1200V,~9999M Ω Basic accuracy ± 4% rdg

Rich timer functions

The more detailed the experiment, the more meticulous the settings are required, and three time settings (3153, 3174) have been specially prepared. Timer settings for voltage withstand test ramp up and ramp down, delay timer settings for insulation test, countdown for test time, and display of elapsed time

Automatic testing instrument with full remote control

The standard GP-IB and RS-232C can set all items such as voltage, current, resistance threshold, timer settings, etc. Moreover, the memory can record 32 files (50 steps/file), making it easy to build a fully automated system solely through PLC.

Stable test voltage output unaffected by power frequency supply

HIOKI's voltage tester is designed to apply a stable voltage and prevent damage to the tested equipment through a zero start switch. However, lower priced models may experience waveform distortion due to the influence of the power supply. Please be careful when choosing. 3153 adopts AC/DC and PWM switching mode for any voltage output, so it will not be affected by changes or distortions in the power supply voltage, and can accurately produce stable test voltage.

Product usage examples

DC withstand voltage test for hybrid or EV motors, insulation resistance/DC withstand voltage test for interference filters, DC withstand voltage test for photovoltaic panels, DC withstand voltage test for thin film capacitors, AC/DC withstand voltage test for servo amplifiers, insulation withstand voltage test for batteries and DC drive equipment

Japanese HIOKI3153 high-voltage insulation resistance testerIndicator parameters

Voltage endurance test section

Output voltage AC/DC 0.2-5.00kV, 500VA (rated for 30 minutes)/DC0.2-5.00kV, 50VA (continuous)

Voltage setting method: digital setting (setting resolution: 0.01kV)

AC waveform/frequency sine wave (distortion rate below 5% under no load), can switch between 50/60Hz

Current measurement range 10mA, resolution: 0.01mA/100mA, resolution: 0.1mA

Voltage meter accuracy: ± 1.5% f.s (JIS 1.5 level, f.s=5.00kV) (effective value display)

Judgment method Window comparison method (numerical setting)

Insulation resistance test

Rated voltage DC50~1200V (can be set arbitrarily if stepping by 1V)

Rated test current 1mA, short-circuit current: below 200mA

Test range/accuracy: 0.10~9999 M Ω, 4-speed range, ± 4% rdg. (representative value: 0.5 M Ω~1000 M Ω)

Judgment method Window comparison method (numerical setting)

Timer * During actual testing, the setting time of the timer may vary due to different loads

Set range 0.3 to 999 seconds

Ramp/Delay test voltage Ramp up, down, insulation resistance test delay: 0.1-99.9s

The function can program up to 32 files in 50 steps for experimental settings

Save 10 sets of withstand voltage/insulation test content each, hold, buzzer

Monitoring function output voltage, detection current/test resistance, monitoring cycle: 2 times/s or more

Power supply AC100~240V (50/60Hz), 1000VA Max

Volume/Weight 320W × 155H × 480D mm, 18kg

Attachment 9615 High Voltage Test Line (1 for High Voltage Line and 1 for Circuit), Power Line x 1, User Manual x 1, Backup Fuse x 1

Remote control box or testing line

High voltage scanner 3930, a high-voltage switch required for automation of insulation withstand voltage testing

Remote control box (single) 9613, used for start/stop control, 1.5m

Remote control box (dual) 9614, used for start/stop control, 1.5m

High voltage test line 9615 comes standard

PC communicator

Security testing data management software 9267 is an application software for computer control

GP-IB connection wire 9151-02, 2m long

RS-232C connection cable 9637, 9pin-9pin, 1.8m long