Salt dry wet corrosion test chamber
The salt dry wet corrosion test chamber is used to test the electroplating protective layer of electrical and electronic products, electroplated products, and various gold and silver products. It is used to assess the ability of materials and their protective layers to resist corrosive gases, as well as to compare the process quality of similar protective layers. Can meet the effect of salt dry wet corrosion in relative humidity storage cycle test; Using sulfurous acid to accelerate corrosion of materials or products, testing the degree of damage suffered by materials or products over a certain period of time. This equipment is used to assess the quality of materials and their protective layers, as well as to compare the process quality of similar protective layers. It is a test device that artificially simulates corrosive environments.

The salt dry wet corrosion test chamber is used to accelerate the corrosion of materials or products, test the degree of damage suffered by materials or products within a certain time range, and is an artificial simulation of salt spray environment test. It can also be used to assess the ability of certain products to resist salt spray corrosion.
1、 Water filling system: low water level switch control, automatic water filling, automatic disconnection;
2、 Sensor: Platinum resistance PT100 Ω/MV;
3、 Output mode: Pulse solid-state relay output;
4、 Equipment and material configuration
1. Box material: imported corrosion-resistant, aging resistant, and high-temperature resistant PVC sheet;
2. Box cover material: imported transparent PVC sheet, with strong corrosion resistance and temperature resistance, and the box cover angle is designed to be 120 degrees;
3. Sealing method: Adopting a water sealed partition with a sink to effectively prevent toxic gases from escaping;
4. Standard configuration: 6 anti-corrosion V-shaped sample racks and 12 anti-corrosion O-shaped sample rods.
5、 Heating system: corrosion-resistant titanium nickel chromium electric heating heater;
6、 Cooling method
1. Fully enclosed air-cooled single-stage compression refrigeration method;
2. Fully enclosed air-cooled cascade compression refrigeration method;
7、 Timer function: adjustable from 0.1 to 999.9 (S, M, H);
8、 Protection system: leakage, short circuit, overheating, low water level, compressor overpressure, overload protection.