Technical parameters:
Humidification capacity: 10kg/h, applicable area: 100-120 ㎡, rated power: 340W, working voltage: 220V/50Hz, circulating air volume: 2000m ³/h;
Product Introduction:
A wet film humidifier is a device that sends filtered clean water through a water supply pipeline to the top of the humidifier. Under the action of gravity, the water permeates down the surface of the wet film and is fully absorbed by the water absorbing wet film material, forming a uniform water film. When dry air passes through the wet film material, water molecules fully absorb the heat in the air and vaporize, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy value of the air remains unchanged.
Product features:
Evaporative humidification, energy saving, and high efficiency: Advanced medium humidification and evaporation technology is adopted, and the evaporative cooling medium belongs to the Swedish company's * * product. It is made of plant fiber pulp with special chemical raw materials added, which has good moisture absorption and stiffness, and its chemical composition will not decompose with the action of water and air flow.
A brand new experience of nature: Opening doors and windows for ventilation and cooling, and maintaining 100% fresh air indoors at all times is a major feature of this evaporative air conditioner. It also has unique functions such as using water to clean and filter the air, effectively removing dust, bacteria, and harmful gases from the outside air, and keeping indoor air clean and pure at all times.
Completely environmentally friendly product with significant cooling effect: This machine is a non compressor, pollution-free environmentally friendly product that uses water evaporation on the medium to cool the fresh air entering the room.
Automatic water shortage control: When the machine humidifies, the operation of the water pump is controlled by the water level switch of the water tank. When the water level in the water tank is insufficient, the water level sensor sends a water shortage alarm signal. After 30 seconds, the machine automatically enters standby mode. When the water level reaches the water level, it needs to be restarted before the system can continue to operate.
Convenient air supply adjustment: This machine is equipped with an airflow guide needle, which can adjust the air supply direction according to needs, and has three wind speeds to choose from: high wind, medium wind, and low wind.
Automatic humidity control (standard configuration)
Place the humidity sensor controller in a location where the humidifier cannot directly blow and is easy to observe, connect the wall power supply, and connect the output terminal to the humidifier. This way, when the humidity reaches the set value, the humidifier will automatically stop humidifying. When the humidity drops, it automatically turns on for humidification to maintain the required room humidity. Large font high brightness digital display screen, long-life resistive humidity sensor controller. Control accuracy ± 5%.
Filter (standard configuration)
10 inch 5 μ cup precision filter, specially designed without cracking, can filter out rust in water
Solid particles such as sand, hemp rope, raw material tape, colloids, etc.
We also offer alternative water tanks with stainless steel or hard plastic casings.
Fully automatic water softener, pure water purifier (optional)
Use the fully automatic water softener provided by Jibei Company to delay the formation of wet film scaling on the evaporation material (extend the replacement time, usually every 8-15 years). The control head of the fully automatic water softener is a product of FLECK, a US company. The device has a high degree of automation and is controlled by a program to achieve automatic operation. The regeneration process is fully automated, and users only need to regularly add regeneration agents (industrial salt) to achieve continuous water supply under fully automatic conditions.
Selection of Humidifiers for Electronic Workshops
At present, domestic electronics companies have increasingly strict requirements for workshop quality and static electricity. In order to ensure the factory quality of products, it is necessary to strictly control the temperature and humidity in the production workshop, especially the humidity. If it is too dry, static electricity is easily generated in the factory, causing damage to CMOS integrated circuits.
The main functions of the wet film cabinet machine are:
1. Digital display, automatic humidity control.
2. This machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is up, the cleaning/drainage switch can be turned on,
The fan automatically blows dry the wet film to prevent it from rotting, producing mold, and bacterial growth.
3. When the machine runs out of water, it automatically stops working and the water pump does not run. It can automatically drain and ensure the cleanliness of the water tank.
The usage conditions of wet film humidifier:
1. Operating environment: Temperature 0~40 ℃, humidity less than 90% RH
2. Power supply: 220V/50Hz
3. Water source: tap water or similar water, pure water, softened water
4. Water supply pressure: 0.1~0.3Mpa
Key points for humidification in electronic factories and computer rooms:
Wet film humidification belongs to evaporative isentropic humidification, and the humidification process occurs on the surface of the wet film (inside the cabinet), thus eliminating the risk of water falling and condensation, and ensuring reliable installation.
Electronic production workshops, especially surface mount technology (SMT) workshops or communication rooms, usually have extremely high internal heat, and air conditioning supplies air at low temperatures throughout the year. At this time, it is obviously impossible to meet the humidification requirements by cooperating with air conditioning supply and humidification. Cabinet style wet film humidifiers installed in the workshop directly process the dry and hot air in the workshop, increasing air humidity while also reducing workshop temperature, and achieving energy-saving humidification effects.
For the vast majority of electronic companies, due to the low indoor air moisture content in winter, appropriate humidification is required. For users with central air conditioning (including units with added sections), it is recommended to use membrane circulating water humidifiers or high-pressure micro mist with water blocking plates for humidification, which is more energy-efficient and environmentally friendly.
Industry applications:
Textile industry: reduce the occurrence of wire breakage, wrinkling of clothes and inability to form; Reduce the trouble of fiber membrane play during spinning; Reduce the entanglement of raw material yarn on the machine, eliminate static electricity and dust.
Electronics industry: semiconductor component factories, LCD factories, PCB factories, IC testing factories, etc. to prevent electrostatic damage, electrostatic adsorption, and electromagnetic interference.
Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants, and soilless cultivation.
Tobacco industry: tobacco processing, humidity control and dust reduction in production.
Paper industry: Reduce blockages caused by unevenness during transportation of standardized paper, prevent small particles from catching fire, eliminate static electricity, and reduce dust.
Spray painting industry: humidity control in automotive painting factories and various spray painting factories to avoid floating dust in the air and reduce defective products caused by electrostatic bonding.
Plastic industry: Reduce the trouble caused by static electricity in slicing machines and avoid flammable gas explosions.
Printing industry: Reduce the occurrence of printing errors, uneven coloring of documents, paper warping, and other problems during paper transportation, and improve the clarity of color printing.
Preservation and storage: Constant temperature preservation and storage of fruit and vegetable products.
Livestock farming: large-scale breeding of livestock, birds, insects, etc. for moisturizing and disinfection.
Gunpowder industry: production, loading, manufacturing, and storage of gunpowder to eliminate static electricity.
