1、 Product Introduction:

JJ-4BAFully automatic six link automatic lifting electric mixer It is an improved version of the six unit electric mixer developed and produced by our company. The working time is controlled by a microcomputer, and functions such as lighting, automatic lifting, and digital display have been added. The stirring rod is made of stainless steel, which has superior corrosion resistance, easy operation, smooth operation, stepless speed regulation, and digital display of speed. It can strongly stir and conduct comparative tests on high viscosity liquid solutions at multiple points and the same speed. It is necessary for petroleum, chemical, metallurgical, textile, food, medical and health, environmental protection, biochemical laboratories, analysis laboratories, education and scientific research Prepare tools.

2、 Technical indicators:

3、 Notice before use:

1Please read this manual carefully before use.

2The working platform of the machine cannot be excessively smooth (such as tiles, etc.).

3The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.

4The whole machine is strictly prohibited from being used in an environment with direct sunlight.

5The speed control should start slowly from low speed to high speed.

6Place the stirring rod into the solution. If the two blades do not separate during the stirring process, stop working and use the bottom of the container to separate the blades.

7If it is found that the stirring rod is not rotating properly after starting up, the machine should be stopped to adjust the rotation of the stirring rod.

4JJ-4BAInstructions for using the six link automatic lifting electric mixer:

1Place the liquid test bottle or other container correctly.

2Connect the external power supply, turn on the power switch, and the indicator light will turn on.

3Turn on the up or down function switch to calibrate the working depth of the stirring rod in the solution Degree.

4Select timing: Please refer to the appendix for instructions on how to use itA.

5Adjust the speed control knob, observe the speed display screen, and increase it to the desired speed.

6After completing the work, place the speed control knob on theZSmall position, turn off the up and down function switches, turn off the power switch, and cut off the power.

7Wipe the mixing rod clean, and there should be no water droplets or dirt residue on it.

5、 Attention:

1The machine should be placed on a sturdy work platform, with a clean and tidy environment and good ventilation to keep it in good working condition, which can extend the service life of the machine.

2Do not handle hard objects when cleaning the machine to prevent damage to the machine surface.

3It is strictly prohibited to move the machine while it is working normally, and objects are strictly prohibited from hitting the machine.

4Children are strictly prohibited from approaching the machine to prevent accidents.

5Before replacing the fuse, make sure that the power has been cut off.

6After the machine has not been used for a long time, it should be checked whether all functions are normal before restarting to prevent data deviation.

7If there is any abnormal situation, immediately contact the manufacturer. Any consequences caused by unauthorized handling and use of accessories not recommended by the manufacturer will be borne by oneself.

6、 Common faults and troubleshooting methods:

1After the machine is powered on, there is no response: it should be checked whether the power supply is good and whether the fuse is burnt. If it is not burnt, please contact the manufacturer Check the circuit board after approval.

2Motor not rotating: Check for voltage on the motor wire. If there is, the motor is faulty and needs to be replaced.