JJ-4ASix connected electric mixerdetailed introduction

1、 Performance:

1. Power supply: Single AC 220V 50HZ

2. Motor power: ① Synchronous (120W 12V) ② Asynchronous (30W x 6 pieces)

3. Speed range: Start -1200 rpm

4. Timing range: 0-120 minutes

5. Solution bottle lifting height: 20cm

II JJ-4ASix connected electric mixerUsage:

Firstly, install the stirring rods on the six shafts, tighten them, and close each working switch. And adjust the speed knob to the low position, place the solution bottle to be stirred on the lifting frame, raise it to the appropriate height, and align the stirring rod with the center. Turn the timing knob to the ON position or the desired timing time, turn on the power, close the power switch, and gradually adjust from low speed to high speed to the desired working speed. Do not start at high speed.

3、 Precautions for use:

a) Be sure to use a grounding wire when using it.

b) If you find that the mixing rod is not concentric or the mixing is unstable during work, please turn off the power and tighten the clamp to make the mixing rod concentric.

c) When using volumetric flasks with a diameter less than 80mm, additional fixtures are required to prevent the bottle mouth from colliding with the mixing rod and breaking.

4、 There are synchronous and asynchronous methods, which can also be made into automatic lifting The price for digital speed measurement and automatic lifting will be charged separately

5、 Models include: A digital electric mixer

JJ-4B automatic lifting six connected electric mixer

Mixing methods include synchronous and asynchronous, and confirmation during procurement.

Maintenance method: Three guarantees for one year, lifetime maintenance