VIP member
JC-ZS02 digital vibrating screen
1、 Product Introduction: The digital vibrating screen is a new generation laboratory vibrating screen designed and developed by our factory. It has th
Product details
-
1、 Product Introduction
The digital vibrating screen is a new generation laboratory vibrating screen designed and developed by our factory, which has the advantages of easy operation, no rotating parts, and electronic control of amplitude and frequency. Its performance indicators are equivalent to the vibrating screen produced by the German company FRITSCH. Compared with traditional manual screening, it greatly reduces the labor intensity of operators and improves labor efficiency, making it an essential laboratory filter in the particle analysis industry.
Applicable industries
Widely used in particle analysis in industries such as sugar, pharmaceuticals, food, cosmetics, and grains. Adopting advanced integrated circuit control, the operation is extremely simple.
2、 Product parametersInstrument model
JC-ZS-02
Scope of use
≤ 325 mesh
Vibration frequency
3000 times/minute, 6000 times/minute
Amplitude selection
Continuous adjustment from 0mm to 3mm
Vibration mode
1. Fine vibration;
2. Intermittent vibration: The amplitude can be adjusted in steps between 1-2 and 2-3, with each step being further 0.2 ± 0.1mm;
3. Continuous vibration: The amplitude can be adjusted in steps within the range of 1-2 and 2-3, with each step being further 0.2 ± 0.1mm;
4. All three modes can be precisely timed; 5. All three modes can be locked before shutting down the memory
Power Supply
220V±22V，50Hz±1Hz
Instrument size
Vibration unit
control unit
ø300×210mm
280mm×200mm×140mm
Instrument weight
20kg
Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:!
-
Instrument model
JC-ZS-02
Scope of use
≤ 325 mesh
Vibration frequency
3000 times/minute, 6000 times/minute
Amplitude selection
Continuous adjustment from 0mm to 3mm
Vibration mode
1. Fine vibration;
2. Intermittent vibration: The amplitude can be adjusted in steps between 1-2 and 2-3, with each step being further 0.2 ± 0.1mm;
3. Continuous vibration: The amplitude can be adjusted in steps within the range of 1-2 and 2-3, with each step being further 0.2 ± 0.1mm;
4. All three modes can be precisely timed; 5. All three modes can be locked before shutting down the memory
Power Supply
220V±22V，50Hz±1Hz
Instrument size
Vibration unit
control unit
ø300×210mm
280mm×200mm×140mm
Instrument weight
20kg
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-