We can design and customize the most suitable oven for you based on the characteristics of the material baking process. Consultation Hotline:

Applied to the electronics industry (semiconductors, LCM, LCD, LED, MLCC, TFT, precision ceramics, quartz oscillators), electrolytic capacitors, computers, etc; Used for baking, drying preheating, tempering, aging, and other purposes in industries such as motors, printing, pharmaceuticals, automotive parts, communications, hardware, raw material preheating, spray curing, hardware mold preheating and drying, transformer iron cores, coil drying, and small motor drying.

① Model: YD-881-5
② Baking area size: Depth 1000mm * Width 1200mm * Height 1200mm (customizable to any size)
③ Number of pallets: determined according to specific requirements and working conditions
④ Working temperature: room temperature -300 ℃, adjustable at will
⑤ Heating rate: From room temperature to 100 ℃ in about 15 minutes
⑥ Temperature control accuracy: ± 1 ℃
⑦ Temperature uniformity: ± 3 ℃
⑧ Power supply: 380V/50HZ (three-phase five wire)

Basic configuration
① Box material: outer shell made of 1.5mm thick SUS stainless steel plate, surface coated with paint, inner liner1.5mm thick SUS stainless steel plate(Galvanized sheet or A3 cold sheet can be selected)
② Door structure: Double door, container pull dry door handle, high temperature resistant silicone strip
③ Insulation layer: 100mm aluminum silicate fiber
④ Circulation mode: Horizontal air supply, 1 1000W blower motor
⑤ Heating element: covered W-shaped far-infrared electric heating tube (top heating area), 6 tubes totaling 15KW
⑥ Temperature control method: contactor on/off output, PID intelligent dual digital temperature controller main control
⑦ Timer device: 0-99.99 hour constant temperature timer, automatically cuts off heating and sound and light alarm when the time is up
⑧ Safety devices: leakage, short circuit, overload protection; Phase sequence protection, motor overload protection, over temperature protection
Optional feature configuration
① Independent control over temperature protection device: monitoring the overall operation status of the equipment to ensure the safety of the equipment and drying materials
② SSR solid-state relay output: quiet and noise free, more precise temperature control
③ Temperature recorder: Real time recording of working temperature curve, analysis of material baking process ④ Program temperature control: Temperature control according to pre-set heating curve
⑤ Other customer specified functions

Daily maintenance

1. Clean the surface and interior dust to keep the machine clean and hygienic.

2. Check if the current on the ammeter is the same as normal. If there is any abnormality, notify the maintenance worker for inspection.

3. If there is a sudden power outage, the heating switch should be turned off to prevent automatic startup when power is restored.

4. Check if the fan is running normally and if there are any abnormal sounds. If there are any, immediately shut down the machine and notify the maintenance worker for inspection.