Application scenarios:

Temperature transmitters are used to convert various input signals into 4-20mA output signals

● Input: Thermistor (RTD), Resistance (Ω), Thermocouple (TC), Voltage (mV) Product Features:

● High precision

● Output simulation

● Electrical isolation 2KV

● Can use two-wire technology, 4-20mA analog output

● Universal configurable type, operated and maintained through PC

Can be configured using USB

Technical Specifications:

Output signal: Analog 4-20mA

Supply voltage: U=7.5V~45V

Load: Max. (V power supply -7.5V)/0.022A (current output)

Alarm current: Below the measurement upper limit, the output drops to 3.8mA. Above the measurement upper limit, the output rises to 20.5mA

Sensor damage; The sensor circuit breaker output is 3.6mA or 22mA

Input current: ≤ 3.6mA

Current limit: ≤ 22mA

Environmental temperature: -40 to+85 ℃

Storage temperature: -40 to+100 ℃

Protection level: IP00, IP66 (installation)

Cold end compensation: Built in cold end compensation

Operation method: Adjust online through PC programming or PDA controller

Accuracy level: ≤ 0.2K or 0.08%

Measurement variables: temperature (temperature linear transfer), resistance, and voltage

Measurement range: The variation of the transmitter's measurement range depends on the sensor connection mode and input signal

Voltage influence: negligible

Environmental temperature impact: negligible (temperature drift)

Condensation: allowed

Seismic resistance: 4g/2-150Hz

Installation angle: unlimited