80-2C intelligent electric centrifugeDetailed explanation:

1、 Introduction:

80-2C intelligent digital display electric centrifugeOne of the company's new products, it adopts microcomputer control of centrifugal speed and timing, with automatic speed stabilization and precise timing The motor adopts brushless DC motor, which has a long service life and is maintenance free. The shell is made of high-quality PVC engineering plastic, which has a beautiful appearance, is economical and practical, and is widely used in scientific research, education, and production departments such as biology, chemistry, and medicine. Its highest speed is 4000 revolutions per minute, suitable for use in radioimmunoassay identification and separation of cells and large particles.
The digital intelligent electric centrifuge generates centrifugal force by rotating at a certain speed, so that the liquid test substance in the centrifuge tube is separated and precipitated according to its particle size and mass under the action of centrifugal force, achieving the experimental purpose.

2、 Technical parameters:

1Zui High Speed: 4000 RPM

2Whole machine noise: ≤ 70dB

3Timing range: 1-99 minutes

4Working capacity: 20ml * 6 or 20ml * 12

5Power: 135W

6Maximum centrifugal field: ≥ 2350g

7Working power supply: 220V 50HZ

3、 Before using the digital desktop electric centrifuge, please note:

1Before using the digital desktop electric centrifuge, please read this manual carefully.

2The working environment temperature of the digital desktop electric centrifuge is 5-40 ℃, the relative humidity should not exceed 80%, and there should be no conductive dust, explosive gases, or corrosive gases.

3The workbench should be level and stable to prevent vibration, and the workspace should be clean, dry, and well ventilated.

4Before starting up, the inner cavity and rotor should be wiped clean.

5Before starting work, empty centrifuge tubes should be evenly placed and the machine should be run at maximum speed for 1-2 minutes. Only when there are no abnormal conditions can normal work be carried out.

4、 Instructions for using digital desktop electric centrifuge:

1Prepare according to the "Pre use Notice".

2Place the weighed test tube into the centrifuge hole and close the centrifuge cover.

3Connect the power and press the 'on/off' button to turn on the machine.

4Press the up or down button below the speed digital display to set the desired speed, ranging from 1000 rpm to 4000 rpm. Press the button once to change by 100 rpm, and the setting will be automatically saved for long-term use at the same speed.

5Press the up or down button below the time digital display to set the desired time, ranging from 1-99 minutes. Press the button once to change for 1 minute, and the set time will not be saved. After power on, it will automatically shift to 0 (i.e. OFF)

6After setting, press the start button to start working. If you need to exit halfway, please press the pause button first and then turn off the power. Do not directly turn off the power.

7After completing the work, turn off the power and clean the entire machine.