Insulator boiling test box BZ-SF-15-ZLN
Equipment Overview:
Also known as: insulator boiling test box, insulator boiling test box, lightning arrester boiling test box
Suitable for insulators of overhead lines with a nominal voltage higher than 10KV (ceramic or glass edges for AC systems)
The wet heat high pressure test of the child. A specialized testing equipment manufactured for the resistance of zinc oxide to moisture and heat. Shanghai
The test chamber developed and manufactured by Bozhun is equipped with a reflux evaporation condensation system through compressor refrigeration
form. Mainly used to test the moisture and heat resistance of sandwich structures. Place the sample in a boiling test
Boil the sample continuously for 72 hours inside the box and observe whether there are any bubbles, glue cracking, or other phenomena in the sample.
Technical parameters:
1. Temperature control: Simulate PID control through PLC, set RT+10~100 ℃ on the touch screen
2. Heating time: Set to 100 degrees, it takes about 120 minutes to reach;
3. Constant temperature control: The constant temperature is achieved through the reflux system of the condensation and evaporation device;
4. Dimensions inside the heating tank: length 1300 x width 600 x height 700 (mm)
5. Inner box material: SUS304 # high-quality stainless steel with a thickness of 1.5mm;
6. Heating power: Equipped with a total of 16KW heating tubes for constant heating;
7. Evaporator: Exhaust through the cold water reflux device pipeline;
7. Condensation and evaporation: eliminate the evaporator through the compressor refrigeration pipeline;
8. Fixture support: 4 sets of adjustable supports for high temperature resistant insulators.
9. Automatic water replenishment: using upper and lower limit liquid level gauges to automatically add water (delayed control automatic water replenishment function);
10. Components: Deionized water supply device, heating water tank, refrigeration condensation device, evaporation reflux device, circulating stirring system.
