Inorganic material drying equipment-Fornitore globale

Building D, Nanguo Industrial Park, No. 56 Renhe Avenue, Baiyun District, Guangzhou City, Guangdong Province

Microwaves have strong penetrability and can overcome the above weaknesses. When materials encounter microwaves, both the inside and outside will be heated simultaneously, which avoids the problem of poor thermal conductivity of some materials and greatly improves the drying speed. For materials such as wood, insulation materials, honeycomb ceramics, etc., their drying speed can be increased by tens of times.Microwave drying equipmentIn addition to its fast speed, its energy-saving effect is also quite remarkable. Some materials such as glass, ceramics, plastics, and certain foods have little absorption of microwaves, while moisture easily absorbs microwaves, so energy is concentrated to a large extent on the moisture. In general, microwave drying is more energy-efficient than infrared drying by over 30%, and the effect is more pronounced with lower water content.
Inorganic material drying equipment is widely used for drying and dehydrating powdered and crystalline materials in chemical industry. For example: chemical raw materials, chemical minerals, fine chemicals, organic chemical raw materials, inorganic chemical raw materials, chemical fertilizers, polymer materials, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagent products, etc.
Inorganic material drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 80KW (adjustable)
4. Dehydration rate: 80 kg/hour
5. Drying temperature 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 60mm
7. Belt width: 900mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 16770 x 1660 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the fact that this device is a non-standard device, the above parameters are for reference only. Please feel free to call us for inquiries or visit us directlyWeiyas CompanyConduct inspections and negotiate cooperation.