VIP member
ISV90-800x80MC oil suction filter
Our ISV series replacement Dawn oil suction filter is a lightweight and sturdy oil suction filter with an aluminum alloy shell, filter element, bypass
Product details
Product Introduction
Our ISV series replacement Dawn oil suction filter is a lightweight and sturdy oil suction filter with an aluminum alloy shell, filter element, bypass valve, visual sensor, and electric sensor. It should be installed vertically on the pipeline outside the fuel tank.
Product Features
1. Equipped with a visual sensor: As the filter element gradually becomes clogged with pollutants, the red signal ring inside the observation window of the visual sensor slowly rises. When the red signal ring rises to the * * position (completely red inside the observation window), it indicates that the filter element has been clogged with pollutants to the point where it needs to be cleaned or replaced. After cleaning or replacing the filter element, press the reset button to make the red signal ring slide down.
2. Electric transmitter: When the filter element is blocked by pollutants and the vacuum degree at the oil outlet is -0.018MPa, the micro switch inside the transmitter will actuate, sending a switch signal indicating that the filter element should be cleaned or replaced. If the machine cannot be stopped immediately or no one comes to replace the filter element, the bypass valve located inside the filter cover will automatically open (opening pressure: -0.02MPa).
3. Equipped with a bypass valve: When the filter element is contaminated and blocked to the outlet pressure (vacuum degree -0.02MPa), the bypass valve will automatically open to avoid oil pump suction and other faults.
Short lifespan factor
1. Poor quality of hydraulic oil filter element.
2. The medium used has poor compatibility with the leather material, or there are pollutants mixed in.
3. The selected accumulator is not suitable, and the oil temperature is too high or too low.
During the operation of the hydraulic oil filter element, if the reciprocating frequency is too high, the service life will sharply decrease.
5. Poor installation quality and unreasonable design.
6. Ensure that the hydraulic oil filter operates under low pressure, avoiding collision between the skin bag and the accumulator valve, and extending the service life of the skin bag.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-