Introduction to IPX9K High Temperature and High Pressure Spray Test Chamber

Product IntroductionIPX9K

High temperature and high pressure spray rain test chamber

TECHNICAL INDEX

The laboratory consists of a testing bench, a water storage tank, a control box, a product dehydration buffer zone, and a spray system.IPX9K

1Technical parameters:1000Inner box size: Depth1000X width1000X high

2㎜1200Dimensions: Depth1500X width1900Mm x height

3㎜

5Spray system: composed of Italian high-pressure and high-temperature water pump, high-pressure and high-temperature water pressure gauge, high-pressure and high-temperature solenoid valve, and high-pressure and high-temperature hydraulic pipe.

6Pipe diameter: Six minutes80Spray water temperature:

7°80Jet water pressure:～100bar(8000～10000Kpa)100

8kilogram14Spray flow rate:～

916L/min10Spray distance:～

1015cm0Spray angle and time:30°60°90°30Spray water at every angle

11secondExecution standards:IEC20653

EU standardsIPX9KHigh temperature and high pressure injectionChamber

introduceSuitable for shell protection levelIEC（IP Supplementary code, enhanced testing) for electrical product inspection,depend onDIN40050The relevant rules in the standard are implemented. To provide waterproof testing designed for automotive parts, motor and electronics industries, simulating natural environments or human factorstesting machine

Our company also has models that meet different standards in various countries around the world for customers to choose from.IPX9K

High temperature and high pressure spray test chamber - box body part;

Stainless steel turntable and nozzle in the studio;

The exterior wall panel is made of cold-rolled sheet and electrostatic plastic;The interior wall panel isSUS304

Stainless steel plate production;1Stainless steel plate turntable table top, the power part is integrated with motor reduction by Shanghai Oute Company, with a specific speed of120∶、90W

governorIP9K

High temperature and high pressure spray test chamber - water circuit composition

Main configuration: The integrated structure of the test chamber includes a working room, a worktable turntable, a high-pressure splashing mechanism, and a water system. In order to reduce the footprint, the water system, water tank, and power supply are all installed at the bottom of the chassis.

The water pump is made of * * * stainless steel corrosion-resistant pump;

There are glass rotor flow meters produced in Hangzhou;

Multi way ball valves and bypass valves are made of stainless steel;

Various connectors are made of brass;

The stainless steel water tank is equipped with a multi mesh filter screen.

Water supply: Continuous water supply.IPX9K

High temperature and high pressure spray test chamber - structural design and configurationThe entire box of this waterproof experimental equipment adopts an integral structure, divided into three parts: upper, lower, and right. The upper part is the working room, the lower part is the mechanical room, and the right side is the electrical control cabinet. Select * * * material, process and shape using * * * technology, and use both inner and outer shells***SUS304Stainless steel plate production. The indoor sample rack and other accessories are made of stainless steel material, with a reasonable design and durability. High pressure water spray component/Working rotary table/

Composition of electrical controller20Sample rack design load capacity360Kilogram, horizontal directionRotate degrees. The transmission device is designed reasonably and manufactured precisely. It is driven by a stepper motor and a reducer from * * *, and the speed can be directly set on the touch screen instrumentPLCController control, easy to operate, avoiding the inconvenience and complexity of manually adjusting similar devices based on intuition in the past. The lower part of the turntable is equipped with a conductive slip ring, and the sample can be energized during the rotating test process; The test piece can be externally connected to DC10A、10~24VThe power supply is energized without affecting the rotation of the turntable, resulting in a voltage drop

<2V

The equipment is equipped with a sufficiently large water tank for spraying water. The water suction motor injects water pressure from the water tank into the pipeline, and by adjusting the pressure relief valve, it maintains the specified flow rate and pressure and sprays out from the nozzle. The water pump is a high-pressure plunger pump, and the nozzle is an imported atomizing fan-shaped nozzle4Flow meter: An electromagnetic flow meter is used, consisting of an electromagnetic flow sensor and an electromagnetic flow converter. It works based on the Faraday electromagnetic current response principle and can be used to measure the flow rate of experimental water flow. It can achieve control, adjustment, display, and accumulation of flow rate. Output through converter～20mADC

Signal, connected to the central controller, controlled by it, and displayed.IPX9K

High temperature and high pressure spray test chamber - circuit control and protection system7useInch LCD touch screen controller,PLC

The control can separately control the turntable speed, temperature, power on/off, water pump, and test time; The traffic is displayed directly on the touch screen.***Pre set total testing time: testing time9999greatly59hour

divide

Preset the spraying time for each nozzle

Power on: off - on - off (special instructions when ordering)

Import execution components;

Equipped with a water filter;

Non fuse protection switch;

Overload, leakage, fully sheathed terminal blocks;

Equipped with protection such as automatic shutdown;Delivery Attached Documentation:

Instruction manual, circuit diagram, certificate of conformity, warranty card; Operation methods, precautions, basic shipping accessories, and maintenance matters;

Equipment usage conditions5Environmental temperature:+32℃～

℃；Environmental humidity ≤85%

；Power requirements:AC380（±10%）V/50HZ