Watering test box, swing tube type, IPX3/IPX4 waterproof test box

Suitable for conducting IPX3 and IPX4 tests on products. Used for waterproof and splash testing of electrical equipment or components (IPX3 and IPX4), especially for appliances exposed to open spaces such as air conditioners, cable connectors, and converters.

IPX3 refers to preventing the intrusion of sprayed water, preventing rain, or preventing water sprayed in a direction with an angle less than 60 ° from entering the appliance and causing damage; IPX4 refers to preventing splashing water from entering and preventing splashing water from all directions from entering the appliance and causing damage.

The IPX3 swing tube water splashing test is to select a swing tube with an appropriate radius, so that the height of the sample table is at the diameter position of the swing tube. The sample is placed on the sample table, and the distance from its top to the sample spray port is not more than 200mm. Test conditions: The water flow rate is calculated based on the number of spray holes in the swing tube, with each hole being 0.07 L/min. When pouring water, the water sprayed from the spray holes on both sides of the midpoint of the swing tube in a 60 ° arc segment is directed towards the sample. The sample is placed at the center of the half circle of the pendulum tube. Swing the tube along both sides of the vertical line by 60 degrees, for a total of 120 degrees. Test time: continuously water for 10 minutes.

The IPX4 swing tube splash test is to select a swing tube with an appropriate radius, so that the height of the sample table is at the diameter position of the swing tube. The sample is placed on the sample table, and the distance from its top to the sample spray port is not more than 200mm. Test conditions: The water flow rate is calculated based on the number of spray holes in the swing tube, with each hole being 0.07 L/min. The spraying area is the water sprayed from the spraying holes within the 90 ° arc segments on both sides of the midpoint of the swing pipe towards the sample. The sample is placed at the center of the half circle of the pendulum tube. Swing the tube 180 ° on both sides of the vertical axis, for a total of approximately 360 °. Test time: continuously water for 10 minutes.

The main function of this device is to test the physical and other related properties of electronic and electrical products, lamps, cabinets, electrical components, automobiles, motorcycles and their parts under simulated rainy weather conditions. After testing, the performance of the product is evaluated through calibration to determine whether it meets the requirements, in order to facilitate the design, improvement, calibration, and factory inspection of the product.

Watering test box, swing tube type, IPX3/IPX4 waterproof test box

conform to IEC60529:2001《Degrees of protection provided by enclosures(IP Code)》、GB4208-2008《 Clause 14.2.3 and 14.2.4 of the "Protection Class of Enclosures (IP Code)" and Figure 4, as well as Clause 9.2.4 and 9.2.5 of GB7000.1 "Luminaires Part: General Requirements and Tests" and Figure 9.4 requirements

Watering test box, swing tube type, IPX3/IPX4 waterproof test box

1. Model structure: Adopting a double column structure, it is easy to install and the swing tube rotates smoothly.
2. The bottom of the equipment chassis adopts casters with adjustable foot cups, which are convenient for moving and adjusting the machine level.
3. There is a water tank installed inside the chassis, which is equipped with a water level float ball valve to automatically control the water inlet and has high and low water level alarm detection, effectively preventing the water pump from being damaged due to water shortage.

4. Touch screen control+Panasonic PLC;

5. Control functions: manually adjustable flow and pressure of the swing pipe, rain action control of the swing pipe, movement control of the loading platform, and test time control;

6. The testing time can be set from 0-999M, with one click start and automatic shutdown

7. Protection functions: leakage protection, overload protection, short circuit protection;

8 . Stainless steel swing tube; Swing tube drive: using imported Panasonic servo motors (which have the advantages of low noise, speed, and angle).

9. Rotary table drive: Using domestically produced stepper motors, the speed and angle can be set and adjusted on the touch screen, infinitely adjustable within the standard range, and can automatically control forward and reverse rotation (suitable for sample power on testing to prevent winding).

10. The stainless steel nozzle is detachable, making it easy to clean and replace;

11. The nozzle opening and closing can be adjusted, and the spraying radius of the swing pipe can be adjusted;

12. The water supply system includes filters, water pumps, flow meters, solenoid valves, and switch valves;

13. The body material is industrial alloy aluminum and SUS304 # stainless steel plate, ensuring long-term use without rusting

14. Sample rack, adjustable height of turntable, fully sealed electrical part of turntable to prevent water ingress and leakage;

15. The speed and angle of the turntable can be set and adjusted on the touch screen, and can be infinitely adjusted within the standard range;

16. Programmable control function for sample power on/off time: power off 0-999 min - power on 0-999 min - power off 0-999 min (applicable for sample testing when power on/off is required).

Watering test box, swing tube type, IPX3/IPX4 waterproof test box

IPX34 protection level testing equipment lifting load rotating table

Test bench load capacity: 100KG.

2. Rotary table speed: adjustable from 1-5 revolutions per minute, and can also rotate 360 ° per minute in four 90 ° intervals,

Material of the 3rd stage: SUS304 stainless steel, diameter ф 600mm.

The turntable table can be raised and lowered to the testing center point, and the height can be freely adjusted (the actual adjustment height depends on the customer's test item requirements).

5 forward and reverse control, the rotation action is controlled by the control cabinet.

One motor (DC24V including reducer with a reduction ratio of 1:300) inside the rotating table for 6 loads