Overview of Rain Test Chamber Functions

Product IntroductionIP3.4

Rain test chamberIP3.4

Main technical parameters:Complies with:IP3.4

1standardInner box size（mm600）：600×600×

2(Depth x Width x Height)Test bench speed（rpm）：1 ~5

3adjustableSpray ring radius（mm 200

4）：45Swing angle range of sprinkler pipe: 90°300°

5° (adjustable)Diameter of water spray hole（mm0.8）：φ0.4

6perhapsThe spacing between the spray holes（mm50

7）：Flow rate of each spray hole:

80.07 L/min +5%Spray pressure（Kpa）：

980-150150Pipe swing amplitude: * * * ±

10°Swing speed of sprinkler pipe:IP3 15order/min; IP4 10order

11/minTest time:1-999,999min

16(Can be set)Power supply

17220V 50HzExecution standards:

GB2423,38-20 GB4208 IEC-60529Rain test chamber

FUNCTIONAL OVERVIEWIPWaterproof gradetesting machineAccording toIEC60529、GB4208-1993<<Shell protection level（IPCode)>>.Standard requirements for design and manufacturingThis device is widely used by certification and testing institutions for lighting fixtures and electrical and electronic products, as well as quality control departments of production enterprises for product certification and testingIPX1、IPX2、IPX3、IPX4、IPX5、IPX6150The purpose of waterproof testing; This equipment has been widely used in the mechanical and electrical laboratories of various entry-exit inspection and quarantine bureaus, as well as domestic and foreign product certification laboratories, and its performance has reached a level of ******. There are standard test options in the device program, and users can select the required standard test items for testing without setting them up; It also comes with custom testing options, allowing users to set their own test data to adapt to different testing standards; The turntable of the loading platform can tiltAutomatically switch test locations to adaptIPX2The tilt requirements of the experiment enable users to conductIPX2

During the experiment, the test operation can be automatically completed without stopping or changing positions, while ensuring the reliability and accuracy of the test data.get wet in the rainChamber

1. Box StructureThe box adoptsSUS304

2.Made of stainless steel material, the upper part of the test chamber consists of the laboratory and control panel, while the lower part is equipped with a water pump, water tank, electric motor, and reduction transmission mechanism.

3.The door of the box is made of organic glass and sealed with silicone rubber, which has good sealing performance. A wiper is installed on the door for easy observation of the test situation.

4.The nozzle is made of stainless steel tube, and the nozzle hole is processed by laser technology with high precision.

All other parts of the studio that come into contact with water are made of stainless steel and live copper material, which will not cause rusting.

1.Rain test box control system

2.Timer control: Equipped with a digital timer, the test time can be adjusted freely within the range.

3.Speed control: Using a frequency converter, the speed is stable and the control accuracy is high.