IJIntroduction to series pumps:

　　IJThe series corrosion-resistant series is a single-stage single suction cantilever centrifugal pump, and its markings, rated performance points, and installation dimensions all comply with the requirementsGB/T5662-1985Standard, equivalent toISO2858.1975It is promoted by the countryIHThe type belongs to the same type of pump, and its basic installation dimensions are equivalent toIHType.

IJStructural characteristics of alkali pump

The structural feature of the pump is that the pump cover passes through a stopperDFixed on the frame, the pump cover is clamped in the middle through the pump body connection. The pump body is axial suction, radial discharge, foot supported, and can be directly fixed on the base. And support it on the base with a suspension bracket.

The rotation direction of the pump: The pump is directly driven by the motor through a coupling, and when viewed from the motor end, it rotates clockwise.

Pump shaft seal type:

Mechanical seal: specially designed with an inner and outer injection type single end face, fixed with a dynamic ring, compensated with a static ring, and sealed with a certain pressure water flowing through the sealing chamber to flush the friction end face and also provide cooling effect.

Material of the pump: The overcurrent components of the pump are made of stainless steel material. Users can choose the appropriate overcurrent components for the pump according to the corrosion caused by the conveyed medium(That is, the pump body, pump cover, and impeller)Material Science.

　　IJThe temperature of the medium conveyed by the series pump is one20℃ one180oCSuitable for the production of pure alkali and ammonia linked alkali in the alkali industry, ammonium salt liquor, room temperature caustic alkali, chlorine products and chlorates, hypochlorites in chlor alkali production, electrolyte for electrolytic copper and nickel in metallurgy, acid mist solution for cobalt production, slurry solution for zinc production, vanadate solution for vanadium production, acid and urea solution for gold production, and electroplating in the steel industry. Acid washing waste acid treatment solution, nitric acid, sulfuric acid, hydrochloric acid, and phosphoric acid used in the acid production industry. Acetic acid and other media are transported in industries such as petrochemicals, synthetic fibers, papermaking, fertilizers, pharmaceuticals, and environmental protection.

IJPerformance range of series pumps:

Traffic volumeQ：63～400 m3/h;

Head liftH：5～125m;

Rotational speedn：2900、1450 r/min;

Supporting power:055～132kw;

Imported diameter: 50～200 mm;

Maximum work pressure:16 Mpa.

IJThe type of pump is adopted according to the national pump industryISOThe International Standards Joint DesignIHThe technical improvements made on the basis of the model mainly consist of the pump body, impeller, sealing ring, impeller nut, pump cover, sealing components, shaft, suspension components, etc.

IJSeries pump performance parameters: