Huizhou coating machine high temperature resistance initial effect | medium effect | high-efficiency filter

1Huizhou coating machine high temperature resistance initial effect | medium effect | high-efficiency filterFrame: Normally, our high-temperature resistant filters use stainless steel frames, but some customers may choose galvanized frames to save costs when the temperature they need to withstand is not too high,

2.Huizhou coating machine high temperature resistance initial effect | medium effect | high-efficiency filterFilter material: The filter uses ultra-fine glass fiber as the filter material and aluminum foil as the separator; (High efficiency filters without partitions cannot withstand high temperatures and can only be used at room temperature below 80 ℃)

3.Huizhou coating machine high temperature resistance initial effect | medium effect | high-efficiency filterSealing glue: Special high-temperature resistant silicone gel (if it is used in pharmaceutical factories or other factories, special instructions should be given for those that cannot contain silicone substances)

Huizhou coating machine high temperature resistance initial effect | medium effect | high-efficiency filterPrecautions before use

Due to the fact that the organic silicone and inorganic glue used in high-temperature and high-efficiency filters solidify from the surface to the inside during the drying process, the thicker the glue injection height, the more difficult it is to dry. As the glue injection height of high-temperature and high-efficiency filters is about 6mm, the glue cannot be completely cured within 24 hours. If directly installed on high-temperature equipment for normal use, it will inevitably cause cracking, expansion, and detachment of the glue from the outer frame;