How to weld a combination stainless steel water tank? After the installation of the combination stainless steel water tank, do not open the inlet cover casually during the use of the combination stainless steel water tank, otherwise the water quality may be subject to secondary pollution; The combination stainless steel water tank can be disinfected and cleaned on time 1-2 times a year; Do not pile heavy objects on top of the water tank; Do not scratch the box with sharp objects. The combination stainless steel water tank body is ready, with a leg mounted track type spot welding machine welding head welding and fixing, and then a straight seam welding machine, so the combination stainless steel water tank body is ready. The two are the connection between the bottom cover and the cylinder, or fixed and sent to the track type spot welding machine for welding, and then to the circumferential seam welding machine for welding. Then, when connecting the cover and the barrel, the inner hole that is also covered will be set to enter the track type spot welding electrode arm end, covered in the cylinder group, fixed by spot welding, and then welded to the circumferential seam welding machine. The production of this type of tower is nearing completion, and the base that left mainly utilizes the use of bending circular machines, repeating the cycle back and forth until the corners or square tubes form a circle, and the welding machine welds the bottom corners of three triangles, measuring the height. This production base and water tower have been successful. Scsxccom