KS-08Horizontal reciprocating constant speed oscillatorWidely used in environmental monitoring, health and epidemic prevention, medical treatment, biochemistry, food processing, metallurgy, chemical engineering, and various laboratories and research units of colleges and universities. Especially for mixing and blending in chemical analysis and hospital laboratory testing, it is also suitable for cultivating various fungi.

KS-08Horizontal reciprocating constant speed oscillatorThe matching fixture is reliable in quality, easy to use, and the reciprocating oscillation frequency is controlled by a microcomputer. It has power compensation function, which enables the motor to rotate at a constant speed and is equipped with electronic timing for operators to select the best oscillation speed and time, resulting in excellent scientific research results.

1 KS-08Technical Parameter：

1Electricity Source: 220V 50HZ

2Vibration frequency: 80——300order/divide

3Amplitude of oscillation: move back and forth20㎜

4Power consumption:60W

5Working hours:Continuous work for 8 hourstime

6Timing range:0~9999 minutes

7Bottled quantity: 2L wide mouthed bottles * 8 pieces

IIOperating instructions

1Close the power switch, and the upper row will display the original speed value. (Last run speed) The lower row displays the original timing value

2Press the "" (speed) key to set the desired rotational speed.

3Press the H (hour) key to set the hour range, and press the M (minute) key to set the minute range. (Set 0:00 to indicate continuous operation in a constantly open state at irregular intervals)

4After setting all the data, press the RUN button to start, and press STOP to stop running at any time. (At this point, the timer also ends)

5Green is the running light, and red is the stop light. The corresponding indicator light is on, indicating that the controller is in the corresponding state.

IIImatters needing attention:

1Before starting work, check if the power supply matches and ensure that the three pin socket is reliably grounded to ensure safety.

2Choose a medium working speed to ensure the longevity of the instrument. The workbench area of this instrument is large, and the centrifugal force inertia is high during oscillation. When oscillating at high speed, the instrument will move. If it affects the work, install anchor screws on the cement floor and tighten them.

3Liquids such as acid, alkali, and water must not seep into the interior of the instrument to prevent corrosion of the components.

This instrument product is responsible for any quality issues within one year from the date of manufacture, and we implement a three guarantee policy

Our factory's products:
(In addition to the following products, our factory can also customize instruments according to customer needs. Consultation)
Series of incubators, series of gas bath and water bath constant temperature oscillators, series of speed regulating multi-purpose oscillators, series of magnetic stirrers, electric stirrers, series of water bath pots, sand baths, water tanks, centrifuges, series of crushers, grinders, homogenizers, series of stainless steel electric heating plates, lifting tables, constant temperature plates, series of quartz sub boiling and stainless steel distilled water dispensers, series of electric furnaces, constant temperature carriers, series of analytical instruments.