Product details:

Characteristics of honeycomb inclined tube packing:

1. The wet area is large and the hydraulic radius is small.

2. The laminar flow state is good, and particle settling is not affected by floc flow interference.

When the length of the inclined pipe is 1 meter, the effective load is 3-5 tons per square meter? Design in time. Control V0 within the range of 2.5-3.0 millimeters per second for optimal effluent quality.

4. When using honeycomb inclined pipes at the water intake with a length of 2.0-3.0 meters, they can safely operate and treat high turbidity with a mud and sand content of 50-100 kg/m3.

5. Adopting inclined tube sedimentation tank, its processing capacity is 3-5 times that of horizontal flow sedimentation tank, and 2-3 times that of accelerated clarification tank and pulse clarification tank.

Characteristics of straight pipes:

1. The processing efficiency is higher than that of activated sludge method, with a general hydraulic load of 100-200 m3/m2 · day and an organic load of 2000-5000 g/m3, thus reducing the footprint.

2. The aeration intensity is lower than that of activated sludge method, and there is no need for sludge reflux, which can reduce power consumption and simplify management.

3. The small amount of sludge reduces the workload of post-treatment such as sludge dewatering.

4. The generated sludge has good settling properties, which is beneficial for the removal of suspended solids in the later stage.

5. Strong adaptability, able to adapt to a wide range of different water qualities, with strong tolerance for sudden changes in water quality and quantity, and maintaining stable treatment effects.

Installation and usage instructions

1、 On site preparation:

1. Preparation of hot stamping power supply and cables;

2. Prepare 2 500W soldering irons;

3. Operators and supervisors are in place;

4. After the completion of the inclined tube filling hot welding, the large volume will occupy a lot of space, and a storage area should be reserved in advance;

2、 Hot welding operation

1. Open the packaging of the inclined tube packing, place the first piece of inclined tube packing flat on the ground, take the second piece of inclined tube packing and place it on top of the first piece of packing. Check the cut of the inclined tube packing, which must be at a 60 ° angle and in a hexagonal honeycomb shape. After checking, start to heat and bond the adhesive points;

2. All flat joints at both ends of the hexagonal honeycomb should be hot pressed, and at the joint of the two flat surfaces on both sides, more than four points should be hot pressed. In the middle of the two inclined tube filling surfaces, more than four points should be welded to ensure a firm welding;

3. Pay attention to the operation rhythm during hot stamping, control the temperature well, and do not miss the number of hot stamping points;

4. Each inclined tube packing is packaged as a separate hot stamping unit, and after the hot stamping is completed, it is neatly stacked on the site;

5. Make sure to cut off the power supply of the soldering iron during the break and place it safely;

3、 Safety precautions

1. Pay attention to personal safety and prevent burns and electric shock when hot connecting the contact points;

2. The hot welding operation requires at least two people to be present, assist each other, and cooperate with the operation;

3. The hot welding operation must be carried out in an open area, and there must be a guardian during construction;

4. There must be no flammable materials on the hot welding site, and fire-fighting facilities must be present.