The FR050HV high-voltage current sensor is a portable clamp design using the latest CT technology, designed specifically for online measurement of current, leakage current, high-order harmonic current, phase, electrical energy, power, power factor, and other detection of high and low voltage lines. No need to disconnect the tested line, safe, fast, high-precision, high stability and uninterrupted detection. The sensor adopts an automatic opening and closing structure, with the front push jaw opening to clamp the tested wire, and the rear pull jaw opening to separate from the tested wire, used in conjunction with an insulating rod. Used for testing high-voltage lines of 60kV and below.

It can be used in conjunction with various measuring instruments for measurement, and can also be connected to phase detection analyzers, industrial control devices, data recorders, oscilloscopes, harmonic analyzers, power quality analyzers, high-precision digital multimeters, etc. It has the characteristics of simple use and easy portability. Widely used in substations, power plants, industrial and mining enterprises, as well as testing stations and electrical maintenance departments for current detection and field electrical operations. Insulated rods have the characteristics of moisture resistance, high temperature resistance, impact resistance, bending resistance, and high insulation.

Characteristics	CT clamp structure
Function	Detection of current, leakage current, transformation ratio, high-order harmonic current, phase, electrical energy, power, power factor, etc. of high and low voltage lines
Output	Current sensing output
Jaw size	Φ50mm
Secondary development display window	46*30mm
Range	AC 0.0mA～1200A
resolution	AC 0.1mA
Accuracy	± 1.0% FS (50Hz/60Hz; 23 ℃± 2 ℃) wire at the center of the clamp
phase error	≤3°(50Hz/60Hz；23℃±2℃)
Turn ratio	4000：1
Reference load	RL： 0～10A≤50Ω；0～100A≤5Ω；0～1200A≤0.5Ω
Quality	300g
External dimensions	Width, thickness and height 87 * 37 * 262mm
output interface	10cm long, can be connected by opening the upper and lower covers
Electric field interference	When the external electric field is 100A and close to 30mm, it is about 10mA
Wire position	The tested wire is in the center position of the clamp
Housing material	45Hz~65Hz (measured current frequency)
line voltage	AC 60kV and below line testing (the telescopic insulation rod should be fully opened)
operation temperature	-25º C to +55º C
dielectric strength	AC3700V/rms (between iron core and shell)
current frequency	45Hz~65Hz (measured current frequency)