Advantages and Characteristics:The basic function of the fixed component (guide rail) of the CPC linear guide HR20FL system is like a bearing ring, a bracket for installing steel balls, and has a "v" shape. The bracket wraps around the top and two sides of the guide rail. In order to support the working components of the machine tool, a set of linear guides has at least four brackets. Used to support large working components, the number of brackets can exceed four.

The CPC lightweight ball linear guide series adopts a high load, high rigidity O-shaped arrangement four column ball circulation design. The contact angle between the ball track surface and the ball is 45 degrees, which can achieve the effect of equal load in all directions. AR/HR/ER lightweight linear guide, with four rows of circulating channels for the slide, two of which are located in plastic fittings, can reduce the weight of the slide by 10-20%.

Stainless steel reinforcement plate with scraping function, L-shaped design can be fixed with screws above and below the sliding seat, enhancing the rigidity and wrapping of the end cap. Enable the product to move at high speed. AR/HR/ER lightweight linear guides mainly provide preloading grades such as VC and V0, which improve the tolerance of customer machined parts, increase usability, and save customer processing costs.

◆ High speed resistance

◆ Lightweight steel reflux hole design

◆ Four directional equal load design

High tolerance tolerance for machining part fit

◆ Share slides with ARC/HRC/ERC

◆ Can provide locking and bottom locking slide rails

◆ Can provide special surface treatment for steel

Excellent power performance: Vmax>5m/s, amax>300m/s2

◆ Double sealed lip dust-proof design on the end face, available in two types: universal contact type and low resistance non-contact type

◆ Accuracy

◆ Pre compression gap

◆ Model size

Customized Requirement Symbol Explanation