Hydraulic hoof shell removal machineMainly used for pig hoof shell removal, hydraulic control, mainly used in conjunction with pig slaughter assembly lines, easy to operate, time-saving and labor-saving.

Usage process and precautions

(1) Open the protective cover under the machine and add hydraulic oil.

(2) Hang the balancer and adjust the height of the hydraulic pliers.

(3) Connect the device power cord, three live wires, one neutral wire, and one ground wire.

(4) Turn on the power lock.

(5) Turn on the emergency stop switch.

(6) Press the green start button, press the operating handle button, and check if the machine can operate normally.

(7) If the jaws are not functioning properly, adjust two of the three live wires of the power cord.

(8) The machine can operate normally.

2. After using for a period of time, regularly check the oil level in the hydraulic station to avoid oil shortage.

3. Avoid direct contact between the machine and water during use.

Technical Parameter

Voltage:380v 50hz

Power:1.5kw

Size: 650 * 450 * 1500mm

Hydraulic hoof shell removal machineThe main focus is on the removal of pig, cow, and sheep hoof shells, using a hydraulic control system. It avoids the complexity and effort of manual processing of hoof shells, and only requires soaking the pig, cow, and sheep hoof shells in hot water for a moment to achieve bone and meat separation. This product has a simple structure and uses a high-quality hydraulic station to ensure that the product can be used for a longer period of time without quality problems. Before leaving the factory, it must undergo strict testing, so you can use it with confidence. Technical parameters: Voltage:380V power: 1.5kw size: 650 * 450 * 1500mm
Hydraulic hoof shell removal machineThis is a machine designed by our company for the removal of pig, cow, and sheep hoof shells. It is small in size, flexible in movement, and easy to operate. It uses a hydraulic control system and a foot switch. The Gansu hoof shell removal machine can be operated by one person. Place the hooves to be processed at the cutting board hoof clamp, press the switch, and use the squeezing force of the machine to squeeze out the hoof shells. It is efficient, reduces labor costs, and increases profits. Technical parameters: Voltage:380V power: 1.5kw size: 650 * 450 * 1500mm
Hydraulic hoof shell removal machineThe parameters of the hoof shell removal machine are easy to operate and compact in structure. It is used for the removal of pig, cow, and sheep hoof shells. The hoof shell removal machine is popular and uses hydraulic control. If it is a simple removal of pig, cow, and sheep hoof shells, it needs to be soaked in hot water to separate the bones and bones. If it is a depilated hoof shell, it can be directly placed in the machine for operation. The machine is debugged before leaving the factory, and the hydraulic oil is added. After pulling it home, find a professional electrician to connect the electricity. Technical parameters: Voltage:380V power: 1.5kw size：650*450*1500mm

after-sale service:

1. Warranty service: The product is covered by a one-year warranty from the date of successful debugging. During the warranty period, any damage to the product caused by non-human factors will be repaired free of charge (note: vulnerable parts are not covered by the warranty).

2. Debugging service: If debugging is required, our company is responsible for sending personnel to the site for debugging, training operators, and after passing the debugging, the buyer will issue an acceptance report.

3. Training service: Both the supply and demand sides will cooperate in a friendly manner, and our company will send technical personnel to assist in guiding installation and debugging until the equipment can be used and operated normally.

4. Repair service: In the event of equipment malfunction that cannot be resolved by the buyer through repair, the supplier shall arrive at the site for service within three days after receiving notification.