1、 Initial configuration:

Rotary plate marking machinejoin in marriage12 prefixes：The prefix content can be freely selected, usually0-9 numbers, plus two letters.

Single letter head marking machine belt12 prefixes, optional prefix content

model:Handheld marking machine (also known as automatic marking machine) SR-ZM series

working pressure:0.6-0.8Mp

Steel prefix: 12 pieces

Font size: 4mm, 6mm, 8mm, 10mmDifferent specifications of letter height can also be customized according to customer requirements, with a maximum of 12mm.Font: Solid or customizable dot matrix font.

Marking format: Rotary type, can also be customized with single or double letterhead machine

Product features of pneumatic marking machine:

Widely used in the production of automobiles and components, high-pressure vessel manufacturers, aerospace, ships, railways, and rail transit Large steel structure and related enterprises. The main body is composed of cylinders with high impact force, and various specifications of steel formwork are installed on the head. Impact the steel formwork onto the part to be marked through high-speed impact. Specially suitable for permanent identification in fields such as workstation number, serial number, product serial number, production date, etc. It is a good alternative to traditional handheld steel stamp marking.
Pneumatic marking machine has low daily maintenance costs for marking, except that the steel formwork needs to be replaced after a certain period of use. Other issues rarely occur.
As needed, we can provide customers with part marking testing.

IIIinstructions:

1. The pneumatic marking machine is connected to compressed air through air ducts and joints. It can be used when the pressure reaches 0.6-0.8Mpa. When operating, turn a certain character on the code dial directly above it and press the plate handle to achieve it.

2. There are 10 numbers and 2 English letters in the code wheel. When you need to type "8", turn the "8" on the code wheel directly above and hit it.

3. The automatic numbering machine adopts safe protection technology, so there is no need to worry about accidental injury even when typing empty. To ensure the effectiveness of use, the workpiece must be aligned and pressed before striking.

4. When using, align the marking machine with the workpiece with your right hand and place your left hand at the tail of the marking machine. Press and hold with some force to make the marking clearer.

5. If the workpiece is flat, simply place the marking machine on it naturally. If it is a small flat or curved surface, pay attention to alignment, otherwise the printed characters may be uneven.

4Product features:

1. The whole machine is integrated, compact, only requires a gas source, and is easy and convenient to operate.

2. The SR-ZM series pneumatic marking machine uses air compressor gas (it is recommended to use compressed gas of about 0.7Mpa, as unclean gas will shorten the service life)

3. There are 10 digit numbers and 2 English letters in the code wheel. When you need to type a certain character, turn the character on the code wheel to the top and hit it Customers can choose these 12 characters as needed；The single character head machine directly aligns the character code with the position to be marked and pulls the trigger directly.

4. The steel head is specially made of alloy steel, which is resistant to compression and wear.

5. The Rockwell strength of the metal parts suitable for marking with this marking machine is around 58, and the number of uses of the marking machine is about 1 million times (for ordinary carbon steel) for marking.

6. The prefix is designed in a T-shaped shape for better safety and to prevent the prefix from flying out and accidentally injuring the operator.

7. The prefix is manufactured using special techniques to ensure its durability and extend its service life. Under normal circumstances, the number of hits for each prefix is around 100000 times, depending on the material used.

7. Easy to disassemble the letter head, in order to facilitate customer use, it is specially equipped with an inner hexagon. If customers need to replace the letter head, they can quickly remove the screws on the turntable with the inner hexagon.

8. When using the aircraft for a long time, pay attention to maintenance to prevent weak impact. You can use the accompanying lubricating oil to open the connection between the handle and the air pipe, and drip a few drops of lubricating oil from the inlet of the air pipe.

9. The configuration length of the trachea is 9m, which can meet the customer's working length range. If it is not enough, the trachea can be directly connected externally, and the trachea joint is a standard joint.

10. This product is suitable for marking numbers, letters, batch numbers, etc. on boards of any size.

5precautions

1. Before use, be sure to carefully read the user manual of our pneumatic marking machine.

2. Only compressed air can be used, and the pressure must not exceed 0.8Mpa.

3. Before testing, it is important to ensure that the pressure gauge of the air compressor is correct and reliable to avoid injury caused by overpressure use.

4. When using a marking machine, be sure to wear goggles and protective gloves to ensure the safety of the operator.

5. It is strictly prohibited to use flammable gases such as oxygen, or to use high-pressure gas compressors as the power source for pneumatic marking machines.

6. When replacing the steel head, be sure to first remove the air connector and strictly prohibit pulling the trigger.

7. It is strictly prohibited to point the turntable at oneself or others during work to avoid injury.

8. During operation, it is strictly prohibited to approach flammable and explosive materials, and do not work in harsh environments that are prone to corrosion, rust, and severe dust.

9. Please use and take good care of the tools carefully. Do not hit, drop, or empty the gun at will to avoid damaging the tools.

10. When the numbering machine is not in use and can be repaired, the air source should be disconnected.

11. Failure to operate according to this user manual or violation of routine operation, if any injury or accident occurs, is not related to our company's products and our company shall not be held responsible.

6、 Packing list:

Jinan Feipu Machinery Equipment Co., Ltd

www.cnfipol.com

Technical service hotline:、15820014065