Hand held tractor rotary tiller accessoriesIt is a supporting power source for agricultural tricycles, water pumps, generator sets, small ships, crushers, small construction machinery and other machinery. The interaction of this accessory makes the equipment widely used in water and drought field operations in plains, mountainous areas, and hilly regions; The components are assembled with bolts, so that damage to one part will not result in the scrapping of other parts, reducing maintenance costs. Our company can also provide a complete set of parts processing for this equipment.

Hand held tractor rotary tiller accessories - Precautions for using hand held tractor rotary tiller:

1. At the beginning of the task, the rotary tiller should be in a raised state. First, the power output shaft should be combined to increase the speed of the blade shaft to the rated speed, and then the rotary tiller should be lowered to gradually insert the blades into the soil to the desired depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade enters the soil, in order to avoid bending or breaking the blade and increasing the load on the tractor.

2. In homework, it is advisable to travel at a slow speed as much as possible, which can improve the quality of the work, make the soil chunks finer, and reduce the wear and tear of the machinery. Pay attention to whether there is any noise or metal tapping sound from the rotary tiller, and observe the situation of broken soil and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection, and work can only continue after troubleshooting.

3. When turning on the ground, it is prohibited to work. The rotary tiller should be lifted to lift the blades off the ground and the tractor throttle should be reduced to avoid damaging the blades.

4. When reversing, crossing embankments, and transferring land parcels, the rotary tiller should be lifted to a high position and the power should be cut off to avoid damaging the machinery.

5. After each shift, the rotary tiller should be maintained. Remove soil and weeds from the blade, check the fastening of all connecting components, and add lubricating oil to each lubrication point to prevent further wear and tear.