Hamamatsu ORCA II Digital CCD Camera C11090-22B Industrial Camera CCD Camera Low Noise High Sensitivity Fluorescence Imaging Experiment-Fornitore globale

Room 1010, Building A, Longyu Center, No.1 Longyu Middle Street, Huilongguan, Changping District, Beijing

ORCAII has the characteristics of low noise and high sensitivity. Cooling reduces the dark current to 0.0012 electrons per pixel per second, and the 1024 × 1024 pixel BT-CCD (back illuminated CCD) provides 1 million pixel resolution and high quantum efficiency exceeding 90% peak, as well as wide sensitivity from UV to NIR. This camera is particularly suitable for applications that require detecting weak light with long exposure times and low noise.

　　characteristic

High resolution format (1024 × 1024 pixels)

High quantum efficiency from ultraviolet to near-infrared

Long exposure time (up to 2 hours)

Low readout noise (typical value is 6 electron rms)

　　purpose

● Luminescence and fluorescence imaging

● X-ray scintillator readout

● Reading of X-ray diffraction images

● Neutron radiographic imaging

● Photovoltage inspection

Astronomy

　　detailed parameters

model	C11090-22B
Camera type	Airtight vacuum sealing head*1
Imaging device	Frame transmission CCD
Effective Pixels	1024 (H) × 1024 (V)
cell size	13 μm (H) × 13 μm (V)
Effective area	13.3 mm (H) × 13.3 mm (V)
maximumTrap capacity	80000 electrons
Reading speed	3.15 frames per second
Readout Noise	6 electronic rms (typical values)*4
Pixel clock frequency	High precision readout mode: 0.3125 MHz Fast read mode: 5 MHz
time of exposure	Internal synchronization mode/high-precision readout mode: 3.53 s to 7200 s6 7 Internal synchronization mode/fast read mode: 307 ms to 7200 s6 External synchronization mode/high-precision readout mode: 400 ms to 7200 s6 External synchronization mode/fast read mode: 20 ms to 7200 s*6
cooling method	Forced air cooling water-cooling
Cooling temperature	Forced air cooling:- 65 ° C (ambient temperature: 0 ° C to+30 ° C)2 Water cooling:- 75 ° C (water temperature:+ 20 ̊C）2 *3
dark current	Air cooling (cooling temperature:- 65 Moh C: 0.0065 electrons/pixel/second (typical value) Water cooling (cooling temperature:- 75 Moh C): 0.0012 electrons/pixel/second (typical value)
dynamic range	13,333：1*5
subarray	correct
binning	2 × 2, 4 × 4, 8 × 8
External trigger mode	Edge trigger, level trigger, start trigger, synchronous read trigger*8
Trigger Output	3 programmable timed outputs, exposure timed outputs, trigger ready outputs*8
interface	IEEE 1394b-2002
ad converter	16 bits
Lens interface	C-type interface
power supply	Communication from 100V to 240V, 50Hz/60Hz
power consumption	About 120 VA
Operating temperature	0 ℃ to+40 ℃
Performance guarantee temperature	0 ° C to+30 ° C
Environmental storage temperature	-10 ℃ to+50 ℃
Environmental working humidity	30% to 70% forced air cooling (without condensation)

*1: The sealing head can maintain a high vacuum degree of 10-8 pallets without the need for re emptying.

*2: Thermoelectric cooling or water cooling (replace with DIP SW). The cooling temperature may not reach this temperature; This depends on the operating conditions.

*3: When the exposure time is short, image blurring may occur. The water volume is 0.5 liters per minute.

*4: High precision readout mode

*5: Calculate based on the ratio of maximum trap capacity to readout noise.

*6: When the exposure time is short, image blurring may occur.

*7: Use DCAM-API with values ranging from 400 ms to 7200 s.

*8: C-MOS 3.3 V， Reversible polarity.

　Spectral sensitivity characteristics

　　size