Product scope of application

The damage of natural sunlight and moisture to materials causes incalculable economic losses every year. The UV accelerated weathering tester can reproduce the damage caused by sunlight, rain, and dew. The device conducts experiments by exposing the tested material to controlled cycles of sunlight and moisture, while increasing the temperature. The equipment uses ultraviolet fluorescent lamps to simulate sunlight, and can also simulate moisture effects through condensation or spraying.

ginseng photo mark accurate

GB/T14522-93 "National Standard of the People's Republic of China - Plastic, Coating, and Rubber Materials for Mechanical Industry Products - Accelerated Test Method for Artificial Climate"

GB/T16585-1996 "National Standard of the People's Republic of China - Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent UV Lamp)"

GB/T 16422.3-1997 Plastics Laboratory Light Source Exposure Test Method Part 3: Fluorescent UV Lamp

Equipment performance parameters

Ftype number:HZW-150 (ordinary) Tong type)

FStudio size:450×1170×500（D×W×H）

FOverall dimensions:600×1280×1370（D×W×H）

FTemperature range:RT＋10℃ ～70 ℃

FHumidity range:≥95% R·H

FDistance between lamp tubes:70㎜

FDistance between sample and lamp tube:50㎜

FStandard specimen size:75 × 150mm or 75 × 300mm (special specifications need to be specified in the contract)

Fspoke photo Degree:0.55W/m²(If there are special requirements, an additional radiometer can be selected)

FEffective irradiation area:900×210㎜

FTest time:Adjustable from 0 to 9999H

FBlackboard temperature:40℃～65℃

F UV light and condensation time can be alternately adjusted