HS-CON202Tel voice interface converter-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

No. 39 Ruihe Road, Guangzhou Science City, Huangpu District, Guangzhou City, Guangdong Province

Contact Now

HS-CON202Tel voice interface converter

Product Introduction: HS-CON202Tel interface converter provides ITU-T G.703 standard framed E1 interface and 10/100Base-T Ethernet interface conversio

Contact Supplier

More Products

Product details

Networking solution:

Key Features:

(1) Realize remote monitoring of remote devices by local devices (unique dual row indicator lights, upper row)Indicate the local end,
Bottom rowRemote indication);

(2) Integrated circuits based on independent intellectual property rights;

(3) Ethernet interface 10M/100M, full/half duplex fully adaptive, supporting VLAN protocol;

(4) Each Ethernet port supports AUTO-MDIX (Crossover and Direct Adaptive);

(5) Provide two clock modes: E1 master clock and E1 line clock;

(6) Provide three types of loopback functions: E1 local self loopback (ANA), Ethernet interface to remote loopback (DIG),
Command the Ethernet interface of the other end to loop back to the local end (REM);

(7) There is a pseudo-random code testing function (PATT), which facilitates line opening and can be used as an E1 bit error meter;

(8) E1 can support N * 64k (N=1-32) rates, which means the rate can be adjusted from 64K to 2048K;

(9) Simultaneously supporting both 120 Ω/balanced and 75 Ω/unbalanced impedances;

(10) Has Ethernet monitoring automatic reset function, will not crash;

(11) Provide 1-4 voice access channels, support caller ID and reverse polarity billing functions;

(12) Support the mutual numbering function of various sites;

(13) Support the mandatory configuration function of local devices for remote devices;

(14) The voice port supports O and S ports, with O port connected to the program-controlled switch and S port connected to the user's telephone;

(15) The network management interface adopts SNMP.

Technical data：

E1 interface	Interface standard:	Compliant with G.703 standard
	Interface speed:	n×64Kbps ， n 取值：1～32
	Jitter characteristics:	Meets G.742 and G.823 standards
	Transmission capacity:	1*E1
	Clock mode:	Internal clock, line clock
	Connector:	BNC（75Ω）、RJ45（120Ω）
	Interface impedance:	75 Ω (unbalanced), 120 Ω (balanced)
ＦＸＳ	Ringing voltage:	75V
ＦＸＳ	Ringing frequency:	25HZ
	Two line input impedance:	600 Ω (off hook)
	Return loss:	40 db
ＦＸＯ	Ringing detection voltage:	35V

	Ringing detection frequency:	17HZ-60HZ
	Two line input impedance:	600 Ω (off hook)
	Return loss:	40 db
working conditions	Input voltage:	AC220V； AC 110V ； DC –48V； DC +24V
	power waste:	≤5W
	Operating Temperature	0°C ~ 50°C
	Storage temperature:	-40°C ~ +70°C
	Relative humidity:	95 %

Packaging Information：


HS-CON202Tel reconnection device	1 unit	Power cord (3X0.75mm2) (at -48V voltage)	1 item
BNC Male Head	2 of them	DC-48V power supply	1 piece
User Manual	1 book	AC220V to DC-48V power supply (to be ordered)

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content