VIP member
HR15FN
Advantages and features: The CPC slider HR15FN belongs to the high assembly series of linear guides, with a combined height of 24mm and a slider mount
Product details
Advantages and Characteristics:The CPC slider HR15FN belongs to the high assembly series of linear guides, with a combined height of 24mm and a slider mounting hole of 30 * 38mm. Due to the symmetrical four point restraint of the copper ball, it can simultaneously bear loads in all directions without almost any offset phenomenon, thus having stronger rigidity and maintaining high accuracy.
| model | Assembly size | Guide rail size (mm) | Slide size (mm) | ||||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | E | |
| HR15FN | 24 | 16 | 15 | 15 | 60 | 7.5×4.5×5.3 | 47 | 56.1 | 39.5 | 20.1 | 30 | 38 | 4.5 |
| model | Slide size (mm) | Rated load (KN) | Static torque (Nm) | weight | |||||||
| M×g2 | M1 | S | T | C | Co | Mro | Mpo | Myo | Sliding block (g) | Guide rail (g/m) | |
| HR15FN | M5×7 | - | 4 | 7 | 9.0 | 17.5 | 140 | 100 | 100 | 180 | 1290 |
Hand in hand teaching you how to install Taiwan CPC linear guide HR15FN
Linear guide rail is commonly referred to as linear guide rail, and in Taiwan it is commonly referred to as linear guide rail or linear slide rail. So how can such precise parts be installed? Is it easy to install? Below, Dongguan Chuangweida Hardware and Electrical Co., Ltd. will teach you step-by-step installationCPC linear guide HR15FNGo ahead!
1、 Before installation, the burrs, impurities, dirt, and surface scratches on the mechanical installation surface must be removed.
2、 Gently place the slide rail on the bed, tighten the mounting screws lightly, so that the reference surface of the slide rail can be gently pressed against the installation surface. Both sides of CPC's linear guide rail are reference planes and do not require special reference marks.
3、 Tighten the positioning screws of the slide rail in order to ensure that the track is tightly connected to the horizontal installation surface.
4、 Use a wrench to tighten the assembled screws, starting from the middle and tightening towards the ends in sequence, which will make the installation more secure.
5、 Use a torque wrench to slowly tighten the positioning screws of the slide rail according to the specified torque.
Actually, installationCPC linear guide HR15FNIt's not as troublesome as imagined, just be careful and meticulous during installation. Remember to tighten the screws where they need to be tightened, so that they can be used more safely.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-