brief introduction
HORIBA (Horiba, Japan) infrared oil analyzer OCMA-555Simplified the measurement of oil content in water or soil for various applications. This precision instrument can be used for investigating water quality and hazardous waste sites, monitoring industrial wastewater, analyzing discharged substances after purification, and measuring oil residue adhering to the surfaces of textiles and metal components.
It can accurately detect the concentration of oil in the sample by injecting the extracted sample water into the attached detection tank and installing it on the device. It can display residual oil content on solid surfaces at 0-200mg/L, oil content in soil at mg/kg, and oil absorbance at Abs Choose any of these three testing units. Can it be used for precision machinery? The degreasing ability evaluation of cleaning devices in the semiconductor field, residual oil content evaluation of machining oil and grinding materials, detection of SS and suspended solids mixed in drainage samples, etc., are most suitable for testing pumped oil samples.
The sample can be quantitatively extracted using H-997 solvent. Then simply transfer the oil/solvent mixture solution toHORIBA (Horiba, Japan) infrared oil analyzer OCMA-555Single button measurement can be performed. The analysis is based on infrared (IR) spectral data, and the analysis results are used together with the peak value (approximately 3.4 microns) to determine the oil concentration. The H-997 solvent is insoluble at this infrared wavelength, so only the oil quality is measured. The accuracy of oil quality measurement can reach 0.1 ppm. Automatic calibration will be performed after initializing the standard display values.

characteristic
The main feature is the standard analysis of oil residues. You can choose from three detection units based on their usage: mg/L, mg/kg, and Abs. Adopting a clear and backlit LCD display method. Using built-in timestamps can record results. Read the data onto the LCD screen, or use the parallel printer port or send the data to the computer through the RS-232 port. The solvent recycler SR-305 (82900-20) can be used to recycle S-316 solvent, but this equipment needs to be purchased separately.

Oil content analyzer

Random configuration:Quartz cuvette with lid, power cord, B heavy oil (standard), 2-amper fuse, 10ml oiler, and 25ml oiler.

optional
Solvent Regenerator SR-305
SR-305 is a solvent regenerator developed by HORIBA as an extraction solvent for detecting oil content.
It can exert remarkable dominance and regeneration ability through the process of activated carbon and activated alumina layer columns.

Technical parameters:

, 230 volts
Optical reading: 0 to 200 milligrams per liter, range 0 to 9.9, 10 to 99.9, or 100 to 200
Sensitivity: 1% rated lower limit
Display: backlit LCD display screen
Detector: Thermoelectric sensor
RS-232C and serial printer ports
Working voltage: 230V AC, 50Hz
Specification: 9-3/4 inches wide x 7-7/8 inches high x 11 inches thick (250mm x 200mm x 285mm)
20mm quartz colorimetric dish