H3C S5500V3-SI is a new generation of intelligent, network managed Gigabit Ethernet switch developed by H3C using ASIC technology, which is high-performance, high port density, high security, and easy to install. It supports IPv4/IPV6 dual stack management and forwarding, static routing protocols, RIP, OSPF, BGP, IS-IS and other routing protocols, and supports rich management and security features.

SmartMC (Intelligent Management Center)
With the increase of network scale, a large number of access devices are required at the network edge, which makes the management of these devices very cumbersome. The main purpose of SmartMC is to solve the centralized management problem of a large number of dispersed network devices. Intended to solve the operation and maintenance tasks of small businesses mainly focused on switches. SmartMC achieves unified operation, maintenance, and management of networks through built-in devices and graphical operations
High performance IPv4/IPv6 business capability
The H3C S5500V3-SI series switch implements a hardware based IPv4/IPv6 dual stack platform, supporting multiple tunneling technologies, rich IPv4 and IPv6 three-layer routing protocols, multicast technology, and policy routing mechanisms, providing users with a comprehensive IPv4/IPv6 solution.
IRF2 (Second Generation Intelligent Elastic Architecture)
The H3C S5500V3-SI series switch supports IRF2 (Second Generation Intelligent Elastic Architecture) technology, which connects multiple physical devices to each other and virtualizes them as a logical device. In other words, users can manage and use these multiple devices as a single device.
|
S5500V3-28S-SI |
S5500V3-54S-SI |
S5500V3-28PS-SI |
S5500V3-54PS-SI |
S5500V3-36F-SI |
S5500V3-28S-DP-SI |
S5500V3-54S-DP-SI |
S5500V3-36F-DP-SI |
S5500V3-54F-DP-SI |
|
432Gbps |
||||||||
|
166Mpps |
||||||||
|
24 10/100/1000Base-T adaptive Ethernet ports, 4 10G SFP+ports |
48 10/100/1000Base-T adaptive Ethernet ports, 6 10G SFP+ports |
24 10/100/1000Base-T adaptive Ethernet ports, 2 Gigabit SFP ports, 2 10G SFP+ports |
48 10/100/1000Base-T adaptive Ethernet ports, 4 Gigabit SFP ports, 2 10G SFP+ports |
24 Gigabit SFP ports, 8 10/100/1000Base-T adaptive Ethernet ports, 4 10G SFP+ports |
24 10/100/1000Base-T adaptive Ethernet ports, 4 10G SFP+ports |
48 10/100/1000Base-T adaptive Ethernet ports, 6 10G SFP+ports |
24 Gigabit SFP ports, 8 10/100/1000Base-T adaptive Ethernet ports 4 10G SFP+ports |
48 Gigabit SFP ports, 6 10G SFP+ports, 1 10/100/1000Base-T out of band management port |
|
440×160×43.6 |
440×260×43.6 |
440×160×43.6 |
440×260×43.6 |
440×260×43.6 |
440×360×43.6 |
440×360×43.6 |
440×360×43.6 |
440×360×43.6 |
|
≤2.2kg |
≤4.0kg |
≤2.2kg |
≤4.0kg |
≤3.5kg |
≤5.6kg |
≤6.0kg |
≤4.5kg |
≤4.5kg |
|
1 piece |
||||||||
|
AC Rated voltage range: 100V~240V AC, 50/60Hz • Maximum voltage range: 90V~264V AC, 47-63Hz |
||||||||
|
Single AC: 17W |
Single AC: 19W |
Single AC: 17W |
Single AC: 19W |
Single AC: 27W |
Single AC: 16W Single DC: 22W Dual AC: 18W Dual DC: 27W |
Single AC: 18W Single DC: 23W Dual AC: 23W Dual DC: 29W |
Single AC: 29W Single DC: 30W Dual AC: 35W Dual DC: 35W |
Single AC: 36W Single DC: 38W Dual AC: 43W Dual DC: 43W |
|
Single AC: 37W |
Single AC: 53W |
Single AC: 37W |
Single AC: 53W |
Single AC: 54W |
Single AC: 37W Single DC: 41W Dual AC: 39W Dual DC: 45W |
Single AC: 55W Single DC: 56W Dual AC: 57W Dual DC: 61W |
Single AC: 52W Single DC: 54W Dual AC: 58W Dual DC: 60W |
Single AC: 77W Single DC: 77W Dual AC: 80W Dual DC: 84W |
|
-5℃~45℃ |
||||||||
|
5%~95% |
feature
|
|
|
Support GE port aggregation |
Support 10GE port aggregation |
|
Support static aggregation |
|
Support dynamic aggregation |
|
Support cross device aggregation |
|
|
Supports IEEE802.3x traffic control (full duplex) |
Support storm suppression based on port rate percentage |
|
Support PPS based storm suppression |
|
Support storm suppression based on bps |
|
|
support |
|
Supports 32k MAC addresses |
Support black hole MAC addresses |
|
Support setting the maximum number of port MAC address learning |
|
|
Support port based VLAN |
Support MAC based VLAN |
|
Protocol VLAN |
|
VLAN based on IP subnet |
|
Support QinQ, flexible QinQ |
|
Support VLAN Mapping |
|
Support Voice VLAN |
|
Support MVRP |
|
|
Support STP/RSTP/MSTP, PVST |
Support SmartLink |
|
Support RRPP |
|
Support ERPS Ethernet Ring Protection Protocol (G.8032) |
|
|
DHCP Client |
DHCP Snooping |
|
DHCP Relay |
|
DHCP Server |
|
DHCP Snooping option82/DHCP Relay option82 |
|
|
Support IRF2 intelligent elastic architecture |
|
Support distributed device management, distributed link aggregation, and distributed elastic routing |
Support stacking through standard Ethernet interfaces and other methods |
|
Support local stacking and remote stacking |
|
|
Support static routing |
Support RIPv1/v2, RIPng |
|
Supports OSPFv1/v2, OSPFv3 |
|
Support BGP4, BGP4+for IPv6 |
|
Support IS-IS |
|
Support VRRP/VRRPv3 |
|
|
Support ND (Neighbor Discovery) |
Support PMTU |
|
Supports IPv6 Ping, IPv6 Tracert, IPv6 Telnet, IPv6 TFTP |
|
Support manual configuration of Tunnel |
|
|
Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 |
Support PIM Snooping |
|
Support MLD Proxy |
|
Support multicast VLAN |
|
Support IGMP v1/v2/v3, MLD v1/v2 |
|
Support PIM-DM, PIM-SM, PIM-SSM |
|
Support MSDP, MSDP for IPv6 |
|
Support MBGP, MBGP for IPv6 |
|
|
Support streaming mirroring |
Support local and remote port mirroring |
|
|
Support 802.1ag |
Supports 802.3ah |
|
|
Support L2 (Layer 2)~L4 (Layer |
Support Time Range ACL |
|
Support bidirectional ACL strategy for inbound and outbound directions |
|
Support issuing ACLs based on VLANs |
|
Support limiting the rate at which ports receive and send messages, with a minimum granularity of 16Kbps |
|
Support message redirection |
|
Support for 802.1p and DSCP priority re labeling of messages |
|
Support CAR (Committed Access Rate) function |
|
Each port supports 8 output queues, and the CPU port supports 48 queues |
|
Supports flexible queue scheduling algorithms that can be set based on both ports and queues, and supports four modes: SP, WRR, WFQ, and SP+WRR |
|
Support WRED |
|
|
Support user level management and password protection |
Support 802.1X authentication/centralized MAC address authentication |
|
Support Guest VLAN |
|
Support Radius authentication |
|
Support SSH 2.0 |
|
Supports port isolation |
|
Support port security |
|
Support PORTAL certification |
|
Support EAD |
|
Supports DHCP Snooping to prevent fraudulent DHCP servers |
|
Support dynamic ARP detection to prevent man in the middle attacks and ARP denial of service |
|
Support BPDU guard, Root guard |
|
Support uRPF (Unicast Reverse Path Detection), eliminate IP source address spoofing, and prevent viruses and attacks |
|
Support binding function for IP/Port/MAC |
|
Supports plaintext and MD5 ciphertext authentication for OSPF and RIPv2 messages |
|
Support PKI (Public Key Infrastructure) |
|
|
Support XModem/FTP/TFTP loading and upgrading |
Support command-line interface (CLI), Telnet, and Console ports for configuration |
|
Support SNMP v1/v2/v3, web network management |
|
Support RMON (Remote Monitoring) alarms, events, and historical records |
|
Support iMC intelligent management center |
|
Support system logs, graded alarms, and debugging information output |
|
Support NTP |
|
Support power alarm function, fan, temperature alarm |
|
Support Ping and Tracert |
|
Support VCT (Virtual Cable Test) cable detection function |
|
Support DLDP (Device Link Detection Protocol) unidirectional link detection protocol |
|
Support LLDP |
|
Support Loop back detection port loopback detection |
|
|
Supports EEE (802.3az) |
Port automatic power down function |
|
Port scheduled down function (Schedule job) |