The corn processing production line is a food processing assembly line independently developed and manufactured by our company. This production line has advantages such as energy saving and has gained high popularity in China.

characteristic

1. The corn cooker has a one click operation mode, making it easier and more convenient for employees to operate;

2. The cooking time is adjusted through a conveyor belt, and the speed can be variable frequency or infinitely adjustable, suitable for cooking, bleaching, and ironing of various products

3. The insulation device can prevent employees from unnecessary burns during operation, making equipment operation safer;

4. Heating is achieved through various methods such as steam heating or electric heating, and the temperature of the heating is automatically controlled by a temperature controller

5. The frame is made of stainless steel 50 * 50 square tubes welded together to be sturdy, durable, and not easily deformed, which increases the service life of the product;

6. The equipment has the characteristics of smooth operation and low noise.

Structural advantages:

1. The equipment adopts aluminum silicate insulation material, which has good insulation effect and reduces heat loss.

2. The device has an automatic lifting function, which is convenient for cleaning and maintenance.

3. The temperature can be automatically adjusted within 98 ℃, and the temperature difference between the upper and lower layers is relatively small.

4. The automatic temperature control device is equipped with an ultra-high temperature protection device, which can automatically protect when the temperature is too high.

5. The equipment drainage pipeline adopts large-diameter DN50 valves, which facilitate and quickly discharge the wastewater from the equipment.

6. Except for the motor, all other parts of the machine are made of food grade SUS304 stainless steel.

7. Use double-layer mesh belt to prevent the product from floating and causing scalding effect.

Features of fully automatic sticky corn processing production line equipment:

1. Corn cleaning machine: The rolling bar high-pressure spray cleaning machine is a specialized cleaning machine for corn. The corn rotates 360 degrees on the rolling bar belt to truly achieve blind spot cleaning, mainly cleaning the whiskers, miscellaneous insects, etc. on the surface of the corn. High pressure spray water is a circulating water system that saves customers unnecessary expenses at every stage.

2. Head and tail cutting machine: Adjust the length of the cutting section according to your own processing technology. The cutting section length can be adjusted freely, and the conveying speed can also be adjusted fast or slow.

3. Blanching and steaming machine: Some customers need to boil corn in water, while others require steaming. The appropriate equipment is selected according to different processing techniques, and the heating method is either electric heating or steam heating. Both heating methods are chosen by the customer.

4. Drain and air drying machine: The air drying method is room temperature air drying, using 20 fans to only blow away the moisture on the surface of the corn without damaging it.

5. Quick freezing: Quick freezing is divided into quick freezing warehouses and quick freezing tunnels. If calculated based on price, quick freezing tunnels are more expensive, while quick freezing warehouses can be built themselves at a cheaper price with the same effect. Quick freezing is only called quick freezing when the temperature is below minus 35 degrees Celsius.

6. Storage: Storage is commonly referred to as a cold storage, with temperatures ranging from minus a few degrees Celsius to over ten degrees Celsius.

Production of fully automatic sticky corn processing production line, black corn cob steaming, boiling, bleaching and scalding equipment:

Equipment structure introduction:

1. The whole machine is made of 304 stainless steel, which fully meets the safety requirements of food production in China. The blanching line integrates blanching and cooling, and operates without pressure, ensuring safety and reliability.

2. Multiple heating methods are available for selection.

3. Temperature can be controlled, and the conveyor adopts a variable frequency speed regulating motor with adjustable speed. It can be adjusted for different products.

4. The whole machine is designed with an independent inner tank structure and a welded outer frame, which is sturdy and durable, increasing the service life of the equipment. The advantage of the inner liner structure is that it is easy to clean, ensuring the cleanliness of the equipment. Secondly, the mesh belt is not limited by the frame, so even if it is damaged in severe collisions, it will not affect the conveyor of the mesh belt.

5. The insulation layer thickness of the blanching section is 50mm, effectively reducing heat loss and saving energy costs.

6. Automatic temperature control and circulating water system ensure material quality.

7. Double layered double pressure mesh belt ensures that all materials are soaked in cooking water to ensure the cooking effect.

8. The equipment is covered with an exhaust outlet, through which excess exhaust gas is discharged.

9. The cooling section is natural water cooling, which can quickly cool down while entering and exiting, ensuring product quality and taste.