Gas bath constant temperature and speed oscillator

summary:

This instrument is suitable for oscillating cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in scientific research departments such as universities, medical institutions, petrochemicals, health and epidemic prevention, and environmental monitoring. This machine has a reasonable structure, easy operation, and high stability performance. It adopts a digital constant speed device, electronic timing, and digital temperature measurement observation for intuitive observation. It is designed to integrate reciprocating and rotary oscillation, making it an ideal equipment for experimental workers to handle multiple purposes.

1、 Parameters:

1Power supply: 220V 50HZ

2Overall power: 500W

3Vibration frequency: 70-300 times/minute

4Vibration amplitude: Cyclotron, round-trip 20mm

5Constant temperature range: room temperature 50C

6Timing range: 0-9999 minutes

2、 Instructions for use:

AFor heating indication, the light is on during operation and off when the temperature is constant

BPress and hold it to increase the value when setting the temperature.

CPress and hold it to decrease the value when setting the temperature.

DTo set the temperature knob.

1Turn on the temperature control switch, and the temperature display will light up: at this time, press "D" to see the digits flashing, and then press "B" or "C" to see the digits display to the desired temperature value. (Short press on "B" and "C" to jump to the last digit, long hold on "B" and "C" to quickly jump to the last digit and save your work time) Then press "D" to reset, and the number will display the current temperature. Wait a few seconds for the "A" light to turn on, indicating that the heating has entered the working state. When the heating reaches the set temperature, the "A" light will turn off and enter constant temperature to stop heating. When the temperature is lower than the set value, heating will resume. Automatic repetition, no need for further operation (The instrument does not heat up when the set temperature is lower than the temperature inside the box)

2Setting of speed and time:

① Close the power switch, and the upper row will display the original speed value. The bottom row displays the original timing value (last run speed).

② Press the "" (speed) key to set the desired rotational speed.

③ Press the H key to set the hour range, and press the M key to set the minute range. (Set 0:00 to indicate continuous operation in a constantly open state at irregular intervals)

④ After setting all the data, press the RUN key to start, and press STOP to stop running at any time. (At this point, the timer also ends)

⑤ Green is the running light, and red is the stop light. The corresponding indicator light is on, indicating that the controller is in the corresponding state.

3、 Attention:

1The instrument casing should be properly grounded to prevent accidents:

2It is strictly prohibited for various solutions to enter the control room to avoid damaging the host:

Our products come with three guarantees and lifelong maintenance within one year from the date of leaving the factory. Please feel free to use them.

Our factory's products:
(In addition to the following products, our factory can also customize instruments according to customer needs. Consultation)
Series of incubators, series of gas bath and water bath constant temperature oscillators, series of speed regulating multi-purpose oscillators, series of magnetic stirrers, electric stirrers, series of water bath pots, sand baths, water tanks, centrifuges, series of crushers, grinders, homogenizers, series of stainless steel electric heating plates, lifting tables, constant temperature plates, series of quartz sub boiling and stainless steel distilled water dispensers, series of electric furnaces, constant temperature carriers, series of analytical instruments.