VIP member
Gas based thermal shock test chamber
Gas based thermal shock test chamber
Product details
Gas based thermal shock test chamber
Product Introduction:
|
Technical Specifications |
|
|
Temperature range of the test tank |
-55℃— +100℃ |
|
High temperature tank temperature setting range |
+60℃— +150℃ |
|
Heating time of high temperature tank |
RT (room temperature) -+150 ℃ takes about 40 minutes (at room temperature of+10-+30 ℃) |
|
Low temperature tank temperature setting range |
－65℃-- －10℃ |
|
Cooling time of low-temperature tank |
RT (room temperature) -65 ℃ takes about 85 minutes (at room temperature of+10-+30 ℃) |
|
temperature fluctuation |
±1.0℃ |
|
Temperature Uniformity |
±2.0℃ |
|
Impact recovery time |
-55--+85 ℃ takes about 5 minutes. ※ The high and low temperature impact constant temperature time is more than 30 minutes each. ※ |
|
product structure |
|
|
Inner box dimensions |
W×H×D ：500×500×400(mm) |
|
outer box dimensions |
W×H×D ：1800×2000×2200(mm) |
|
Inner box material |
Mirror stainless steel plate (SUS # 304) |
|
outer box material |
Sandgrain stainless steel plate (SUS # 304)Or steel plate baking paint |
|
thermal insulation material |
a. High temperature tank: Aluminum silicate insulation cotton b. Low temperature tank: High density PU foam |
|
door of the box |
Single panel doors for upper, middle, and lower boxes, left opening a. Embedded flat handle b. Rear button: SUS # 304 c. Silicone foam strip |
|
Sample placement rack |
a. Intermediate testing room b. Load capacity not exceeding 5KG c. Stainless steel SUS # 304 inner box |
|
heating system |
Fin type heat dissipation tube shaped stainless steel electric heater 1. High temperature slot 6 KW 2. Low temperature slot 3.5 KW |
|
Air circulation system |
1. Two 1HP motors 2. Stainless steel extended shaft 3. Multi blade fan (SIROCCO FAN) 4. Specially designed fan forced air circulation system |
|
Gas based thermal shock test chamberFreezing system |
|
|
compressor |
Original imported French "Taikang" brand fully enclosed compressor |
|
condenser |
Fin type attached platform dispersing hot air fan |
|
evaporator |
Fin type multi-stage automatic load capacity adjustment |
|
expansion valve |
Danish Danfoss original imported components |
|
refrigerant |
Imported environmentally friendly refrigerant R404A from the United States |
|
Refrigeration auxiliary components |
Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported parts |
The function of gas thermal shock test chamber:
The gas type cold and hot shock test chamber is suitable for industries such as electronic and electrical components, automation parts, communication components, automotive parts, metals, chemical materials, plastics, etc. It is essential for testing the physical changes of materials such as defense industry, aerospace, military industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic and polymer materials. It tests the repeated tensile force of materials at high and low temperatures, as well as the chemical changes or physical damage caused by thermal expansion and contraction of products, to confirm the quality of products. It is used in various fields from precision IC to heavy machinery components and is an indispensable testing chamber for product testing.
Characteristics of gas type cold and hot shock test chamber:
1. Simple control panel, full-color touch screen control, temperature and humidity can be programmed simultaneously.
2. Adopting the original French "Taikang" compressor circulation system, the operation is more stable and reliable.
3. Glass observation window, which can be used for observing test samples in experiments, equipped with anti sweat electric heating device to prevent water vapor condensation and droplets, and high brightness fluorescent lamp to maintain illumination inside the box.
4. Stainless steel inner box, easy to operate, low noise.
Composition of Gas Thermal Shock Test Chamber:
Gas based thermal shock test chamber refers to a test chamber that can simultaneously apply temperature and humidity stress. Composed of refrigeration system, heating system, control system, temperature and sensor system, etc.
The test method for gas type thermal shock test chamber meets the following requirements:
GB/T2423.1.2, GB/T10592-2008, GJB150.3 Gas based Thermal Shock Test Chamber.
Precautions for using a gas based thermal shock test chamber:
1. Keep away from heat sources such as stoves and radiators. Meanwhile, direct sunlight should be avoided. This is beneficial for gas based thermal shock test chambers.
2. It should be placed in a stable location on the ground. Otherwise, the compressor will generate vibration and a large amount of noise during startup, which will shorten the service life of the gas type cold and hot shock test chamber for a long time.
3. It should be placed in a well ventilated area. The back of the test box should be more than 60 centimeters away from the wall, and the top height should be more than 60 centimeters. There should not be too much debris around.
Guangdong Kebao Testing Equipment Co., Ltd. has been focusing on constant temperature and humidity test chambers and constant temperature and humidity for many yearsWet machinethermal shock chamber、High and low temperature impact test chamberEquipment such as salt spray test chamber, ultraviolet aging test chamber, and sand and dust test chamber. Welcome to call for consultation. Consultation hotline:
Tags:  Cold and Hot Shock Test Chamber
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-