gasPEPipe LocatorDetection method
Built in device3There are three detection modes: frequency conversion, constant frequency, and pulse,6Frequency selection,4By selecting the appropriate power, the position and direction of the tested pipeline can be accurately located under different conditions, without interfering with magnetic fields and other acoustic signals.

This device can be connected to any portable connection point, such as a relief valve, a pressure regulating box, a pressure regulating cabinet, or a high-altitude riser. Then, a high-sensitivity micro vibration sensor of grade * is used to receive the vibration signal of gas particles in the pipeline on the ground and convert it into an electrical signal. After professional technical processing such as electronic signal amplification and digital filtering, the signal strength peak graphic display and signal strength digital display are used（0-99）On the LCD screen, and at the same time, in the headphones, restore the real sound inside the pipeline.

Multiple reception methods: hard ground reception, soft ground reception,Valve well relief valve connection method，Connection method of pressure regulating box，Connection method of pressure regulating box.

Application scope:

applicable toDN25~DN400Multiple pipe diameters inside, suitable forPEGas pipelines made of various materials such as pipes and metal pipes, with pressure bearing equipment1.5Mpa.

Positioning accuracy:

Detection distance: Unidirectional locatable municipal medium voltage300~2000M, bidirectional detection1.5Kmabout.

Unidirectional detectable municipal low voltage100~600Meter, bidirectional detection600Mabout.

Detection depth:3Mabout

Note: The detection distance and depth vary with changes in the detection environment

Equipment features:

Acoustic positioning of pressure pipelines is a technology.

UniqueNBFgps

Use dedicatedCPUThe sound waves

Crafted with ingenuityAGCAutomatic gain control algorithm

Prevent engineering accidents

Quickly locate buried gasPEpipe

Avoid accidental excavation and unnecessary excavation

Calibrate the position of gas ground signage for gas piles

Highly integrated into an engineering box for easy portability

Technical Parameter:

Center frequency adjustment range:200/300/400/500/600/700HZ

Receiving frequency range:f1/f2/f3/f4/f5/f6/f7Switchable0-2000HZTunable.

Transmission modes: frequency conversion, constant frequency, pulse.

Rated output power:5W/10W/30W/50W

Transmitter battery working time: greater than10hour

Receiver battery working time: greater than20hour

Charging time: Universal220VCommunication charger

Power supply method: rechargeable lithium battery power supply

Working temperature:-25℃ to+50℃

Maximum working pressure: It is recommended not to exceed1.5MPa

gasPEPipe LocatorStandard configuration: