GICLZ (Wide Type) Drum Gear Coupling

characteristic
The couplings specified in this standard are suitable for connecting two horizontal coaxial lines with a certain angular displacement in the transmission shaft system. When the two shaft ends are far apart, QICLZS type is suitable for transmitting nominal torque of 800~320000N • m and working environment temperature of -20~+80 degrees Celsius;.
Type
1. GICL type coupling GICL1-GICL14S type coupling is shown in Figure 1;
The GICL15-GICL30 coupling is shown in Figure 2_
2. GICLZ type couplings GICLZ1~GICLZ14 type couplings are shown in Figure 3;
The GICLZ15~GICLZ30 couplings are shown in Figure 4.
3. The basic parameters and main dimensions of GICL type couplings shall comply with the provisions of Table 1.
4. The basic parameters and main dimensions of GICLZ type couplings shall comply with the provisions of Table 2
5. The combination of GICL type coupling shaft hole types is Y/Jl, Jl/Jl, Jl/Zl, Zl/Zl, Y/Zl, Y/Y.
6. The combination of GICLZ type coupling shaft hole types is Y/Jl, Jl/JU Y/Yo
7. The shaft holes can also be connected by involute splines, and their dimensions are shown in Table A1.
Tag Example
Example 1: GICL disc shaft
Active end: Y-shaped shaft hole, A-type keyway, dl=50mm, L=112mm；
Driven end: J1 type shaft hole, B-type keyway, d2=45mm, L=84mm GI CL4 coupling JB/T8854.3_2001
Example 2: GICL4 Coupling
Active end: J1 type shaft hole, A-type keyway, dl-50mm，L=84mm;
Driven end: J1 type shaft hole, A-type keyway, d2=50mm, L=84mm 01 (^ 4 coupling) 150><84 JB/T 8854.3-2001 Example 3: GICLZ coupling
Active end: 40 spline teeth, module 3, 30. Flat tooth root, L=167mm;
Driven end: J1 type shaft hole, A-type keyway, d=90mm, L=132mm