Equipment Introduction

This machine is a material baking equipment that uses a gas infrared burner for heating. The material is baked on both sides simultaneously, and the stainless steel mesh belt is driven by a chain to transport the material. The material is evenly distributed and the baking effect is excellent.

　　Structural diagram:

　　Main technical parameters:

Total power: 64.45kw
Energy consumption: 6.8m²/h
Heating temperature: -500 ℃
Drying time: 3-9min
Output: Adjustable
Drive power: 0.55KW
Single burner heat generation: 3.9KW
Effective length of mesh belt: 3.5M
Dimensions: 3500 × 1500 × 1600mm
Number of burners: 24

　　Precautions

1、 Place the equipment in a well ventilated and dry place. Choose a flat and sturdy ground and place it steadily to prevent uneven stress on various parts of the machine, which may affect the normal operation of the equipment.
2、 The power supply should be equipped with a knife switch, and the equipment should have reliable grounding protection.
3、 After placing the pipelines, turn on the power and check the sealing condition of each pipeline. If there is no air leakage, it can be put into use.

　　Operation Manual

1、 Before starting up, check if all connecting components are connected reliably, if there are any loose connections in the electrical wiring, and if the transmission belt is cleaned thoroughly.
2、 Prepare the gas supply device, tighten the gas circuit connection, and ensure there is no air leakage.
3、 Open the gas supply valve and ignite the combustion gas one by one.
4、 Turn on the transmission motor and adjust the speed to the appropriate range. After the machine runs smoothly, materials can be added for baking treatment.