GFG-3015 Taiwan fixed latitude GFG-3015 signal generator-Fornitore globale

Room 1510, Building A, Gonghe International Business Plaza, 3699 Gonghe New Road, Jing'an District, Shanghai

Technical parameters of GFG-3015 signal generator

Main specifications
Output waveform	Sine wave, square wave, triangular wave, ± Ramp, pulse wave, AM, FM, scanning function, trigger, Gate, Burst
Frequency range	10mHz~15MHz, 8 levels in total (automatic selection)
Frequency Resolution	15MHz~150kHz(100Hz); 1.5MHz~15kHz(10Hz); 150kHz~1.5kHz(1Hz); 15kHz~150Hz(0.1Hz); 1.5kHz~15Hz(10mHz); 150Hz~1.5Hz(10mHz); 15Hz~0.15Hz(10mHz); 1.5Hz~0.01Hz(10mH)
Frequency error	0.02%+5-digit number
Output Impedance	50Ω ±10%
Output amplitude range	10.00V~0.01V (with 50 Ω load) 4 amplitude; \|Vac peak\|+\|Vdc\|=5V Resolution: 10mV (10.00V~0.01V)
Output amplitude error	≤ 3% ± 5 digits at 10Hz~1MHz; ≤ 10% ± 5 digits at 1MHz~15MHz
Amplitude unit	Vpp, Vrms, dBm
DC drift	-5V~+5V (with a 50 Ω load); Resolution 10mV
DC drift error	Zui small amplitude ≤ 3% ± 3 digits
Cycle Control	80%: 20%: 80% to 1MHz; Resolution 1%
Periodic resolution	≤ 1%~1MHz at 50% cycle
monitor	Dual display 7-segment monitor, frequency: 6-digit, amplitude: 4-digit
sine wave
degree of distortion	≦ 0.5%(-46dB) THD from 10Hz to 100kHz ; ≦-30dBc to 15MHz (spec. applied form 1Vpp~10Vpp)
triangular wave
linearity error	<1% at 100Hz full scale output
square wave
Asymmetry	±1% of period + 3ns
Rise/fall time	< 18nS
SYNC output
Group resistance	50Ω±10%
level	Open circuit>1Vpp
Modulation characteristic
type	AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type)
wave form	Sine, square, triangle, ramp or Variable Symmetry Pulse
Frequency ratio range	10mHz~10kHz in 3 Frequency Range (automatic switching)
Frequency ratio error	5% ± 1 digit
Frequency ratio resolution	10.0kHz~0.1kHz(100Hz); 99Hz~1Hz(0.1Hz); 0.99Hz~0.01Hz(0.01Hz)
symmetry	90%:10%:90% ; Resolution: 1%
Symmetry error	± 1 digit (≤± 1%)
output level	When adding a 10K Ω load, ≥ 1Vp-p
Sine wave distortion degree	10Hz~10kHz ≦1%
Amplitude modulation
Depth	0~100%
modulation frequency	0.01Hz~10kHz(INT) DC~1MHz(EXT)
Carrier -3dB bandwidth	<100Hz to >5MHz
External input sensitivity	≤ 10Vp-p during 100% modulation
frequency modulation
error	0 ~ ±5%
Frequency modulation ratio	0.01Hz~10kHz(INT) DC~50kHz(EXT)
External input sensitivity	≦5Vpp for 15% deviation
Scanning characteristics
Scan range	15MHz~150kHz ; 1.5MHz~15kHz ; 150kHz~1.5kHz ; 15kHz~150Hz ; 1.5kHz~15Hz ; 150Hz~1.5Hz ; 15Hz~0.15Hz ; 1.5Hz~0.01Hz
SCAN WIDTH	>100:1 (in same frequency range)
Scan Scale	0.01Hz~10kHz
Symmetry control	90%:10%:90% ; Resolution: 1%
mode	Linear/Log Scan
Scan-Out	0 to ≧-5Vp-p into 10KΩ
Trigger characteristics
Start/End Phase Range	80°~90°
proportion	0.1Hz~10kHz
Frequency range	0.1Hz~1MHz (Useful to 10MHz)
External trigger frequency range	DC~1MHz, Compatible with TTL input level
Gate or Burst	Implement by trigger setting
VCF
range	100:1(0 to 10V±1)
Input linearity	<0.5% to 1MHz,<5% to 10MHz
Input impedance	10kΩ
GCV output
	To set the voltage between 0.2V to 2V as per different Frequency
Frequency Counter
INT/EXT	Switch Selector
Range	5Hz~150MHz EXT
Accuracy	Time base accuracy ±1count
Time Base	±20ppm(23℃±5℃) after 30 minutes warm up
Resolution	The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz
Input Impedance	1MΩ // 150pF
Sensitivity	≦35Vrms(5~100MHz); ≦45Vrms(100MHz~150MHz)
Momory
Save/Recall	10 Sets of front panel setting memories
interface	RS-232C
Use power supply	AC 115V/230V±15%, 50/60Hz
attachment	1 power cord Operation manual x 1 Test line GTL-101 × 2
Dimension	290 (W) × 142 (H) × 460 (D) mm, approximately 5 kg