VIP member
GF series CNC computer numerical control five axis indexing plate
Rotating table diameter 125, 170, 210, 255, 320 The pneumatic type uses large high-precision cross roller bearings. Hydraulic type uses radial and axi
Product details
Rotating table diameter Ø 125, Ø 170, Ø 210, Ø 255, Ø 320
The pneumatic type uses large high-precision cross roller bearings.
Oil pressure type uses radial and axial preloaded bearings.
Adopting high-efficiency and high tooth depth dual lead worm drive.
Specifications:
| model | GF-125P | GF-170P | GF-211P/PB | GF-256H/HB | GF-320H | |||||||
| Rotary table diameter | mm | Up 125 | Up 170 | Up 210 | Up 255 | Ø320 | ||||||
| Diameter of central through hole | mm | Ø 30H7 | On 40H7 | On 40H7 | Ø 50H7 | Ø 70H7 | ||||||
|
Workbench height (horizontal position) |
mm | 230 | 260 | 305 | 325 | 355 | ||||||
|
Center height (vertical position) |
mm | 160 | 190 | 225 | 225 | 225 | ||||||
|
Workbench T-shaped slot width |
mm | 12H7 | 12H7 | 12H7 | 12H7 | 14H7 | ||||||
|
Guide block width |
mm | 14 | 18 | 18 | 18 | 18 | ||||||
|
Driving pressure/driving mode |
kg／cm2 | 5/Air compression | 5/Air compression | 5/Air compression | 50/Oil pressure | 50/Oil pressure | ||||||
| Servo motor model | rotation axis | Tilting axis | rotation axis | Tilting axis | rotation axis | Tilting axis | rotation axis | Tilting axis | rotation axis | Tilting axis | ||
| FANUC | α2i | α4i | α4i | α4i | α4i | α8i | α4i | α8i | α8i | α12i | ||
| Mitsubishi | HF75T | HF54T | HF54T | HF54T | HF54T | HF104T | HF54T | HF104T | HF104T | HF204S | ||
| reduction ratio | 1:90 | 1:90 | 1:90 | 1:90 | 1:90 | 1:120 | 1:90 | 1:120 | 1:120 | 1:120 | ||
| Maximum disk speed | min | 44.4 | 44.4 | 33.3 | 22.2 | 33.3 | 22.2 | 22.2 | 16.6 | 16.6 | 11.1 | |
| Allowable load capacity | At the level | kg | 50 | 50 | 75 | 100 | 200 | |||||
| Tilting in (0°90°) |
kg | 35 | 35 | 50 | 75 | 150 | ||||||
| Minimum setting unit | deg. | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | ||||||
| Indexing accuracy | sec | 40" | 60" | 20" | 60" | 20" | 50" | 15" | 50" | 15" | 50" | |
| repeatability accuracy | sec | 6" | 8" | 6" | 8" | 6" | 8" | 6" | 8" | 6" | 8" | |
| Tiltable angle | deg. | +40~-120 | +30~-120 | +30~-120 | +30~-120 | +30~-120 | ||||||
| Rotating worktable weight (Excluding servo motor) |
kg | 100 | 170 | 300 | 370 | 560 | ||||||
| Locking torque | kg-m | 8.5 | 18 | 18 | 26 | 26 | 30 | 70 | 70 | 118 | 118 | |
| Allowable cutting torque | kg-m | 8 | 17 | 17 | 25 | 40 | ||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-