1Machine Introduction：

MK-850-2F dual stationThe screen printing machine is compact in size, fast in operation, and stable in performance. It can be used to form a screen printing production line in a small factory space. The left and right sliding adopts Taiwan's precision track structure, and each workstation's worktable panel has fixed holes to achieve precision at each workstation. Especially suitable for lenses,Printing trademarks on the surface of other lighter and softer products such as PVC film, paper, and PVC cosmetic bags.

IIperformance introduction：

1. MitsubishiPLCTouch screen human-machine interface programmable control,Durable, easy to maintain, and powerful in functionality.

2. Taiwan is used for left and right slidingTBIpreciseguideTrack structure.

3. Automatic four digit counter to count the number of prints.

4. BodyAdopting the frame of Fangtong welding machine, surface metal baking paint.

5. Double column lifting structure, stable and high-precision.

6. Adjustable left and right travel, Taiwan photoelectric switch limit.

7. The angle of the scraper/ink return knife can be adjusted freely.

8. Scraper constant pressure device,Adjustable scraper clamp method,Ensure stable pressure during the printing process.

9. Workbench panelAdopting suction method，Ensure the printing accuracy of the product.

10. The position of the mesh frame can be adjusted back and forth, left and right, horizontal, and high and low.

11. Equipped with Taiwan CEC hydraulic buffers on the top, bottom, left, and right sides to eliminate printing vibrations.

12.The feeding mechanism adopts servo drive and height stroke0-500Adjustable lifting and lowering.

13The whole machine runs fast, smoothly, and with low noise.

14.The synchronous loading and unloading robotic arm is controlled by servo motors.

15.Action mode selection: fully automatic/Semi automatic/manual.

IIIturntableMechanical hand materialscreen printing machineparameter：

Machine model:MK-850-2F Printing surface: flat，Target audience: Multiple products

workbenches：Print one product at a time start mode: Panel、Foot switch

Up and down driving mode:electricitymove Left and right driving mode:electricitymove

Left and right itinerary ：500MM Printing station ：2position

Maximum frame size:500*800mm Maximum height of workpiece:0-100MM

Maximum printing area:350500mm turntableSpeed:800-1000 times/hour

Power requirement: 220V 50-60MHz/3000W Air pressure: 5-7 BAR

Machine appearancesizeprobably：long1800*wide1100tall1500mm