1、 Overview of the entire water treatment process

The whole process water processor combines ultrasonic technology and ultraviolet sterilization and disinfection functions. The electronic descaling device with a filter is a complete water treatment device; The product has functions such as anti scaling, anti-corrosion, sterilization, algae killing, and ultra clean filtration. The comprehensive performance of the equipment is much higher than that of general "RF water processors", "electronic water processors", and "magnetic water processors".

2、 Working principle

The comprehensive water treatment plant is mainly composed of high-quality carbon steel cylinder, specially structured stainless steel mesh, high-frequency electromagnetic field generator, corona field generator, and sewage discharge device. By using an activated iron filter membrane, mechanical filter variable diameter hole blocking, and corona effect field integrated filter body, the hardness substances and composite scales formed in various water systems under actual operating conditions are adsorbed and concentrated, reducing their concentration and achieving the goal of controlling dirt and most hardness scales. And through a transducer, specific frequency energy is converted to the processed medium - water, forming electromagnetic polarized water, causing the arrangement sequence and position of scaling ions to be twisted and deformed. When the water temperature rises to a certain level, the processed water needs a period of time to recover to its original state. At this stage, the probability of scaling is very low, thus achieving the goal of controlling the formation of hardness scale. At the same time, the metal ions on the wall of the device are suppressed, which has a corrosion-resistant effect on the scale free system. In addition, electromagnetic polarized water can effectively kill bacteria, baths, and other microorganisms in the water, effectively inhibiting the growth of microorganisms in the water. So, under normal system operation, the comprehensive water treatment system can complete the comprehensive functions of anti scaling, anti-corrosion, sterilization, algae removal, ultra clean filtration, and water quality control.

3、 Full process water processor function

The full process water processor is a comprehensive processor developed to address the four common problems in various circulating water systems: corrosion, scaling, bacteria and algae, and deterioration of water quality. It replaces the traditional treatment method by replacing the treatment process that requires multiple devices with a single device. It has the functions of comprehensive optimization treatment of water quality, anti scaling, anti-corrosion, sterilization, algae killing, and ultra clean filtration.

4、 Characteristics of water treatment equipment

1. The comprehensive performance of the equipment is much higher than that of general "RF water processors", "electronic water processors", and "magnetic water processors". two Each emitter utilizes differential shielding effect and multi-point array combination. There is no interference between each other and strong targeting.

2. According to different water systems and existing problems, equipment is divided into types A, B, C, D, E, and F.

Type A: anti-corrosion, rust proof, decolorization, ultra clean filtration

Type B: Anti scaling, descaling, ultra clean filtration

Type C: Sterilization, algae killing, ultra clean filtration

D-type: sterilization, algae killing, scale prevention, ultra clean filtration

E-type: anti-corrosion, rust proof, anti scaling, descaling, ultra clean filtration

F-type: sterilization, algae killing, scale prevention, anti-corrosion, ultra clean filtration

5、 Technical parameters

1. treatment effect

Corrosion inhibition rate: ≤ 0.092mm/a, the corrosion rate of the pipeline is reduced to 1/10 of the original;

Scale inhibition and removal rate: ≥ 95%;

Sterilization rate: ≥ 95%;

Algae killing rate: ≥ 95%;

Filtering accuracy: can be selected according to user needs.

2. Inlet water quality

Total hardness (calculated as CaCO3): ≤ 800mg/L;

Water temperature: ≤ 50 ℃ (can be customized in special circumstances);

Work pressure: ≤ 1.6Mpa

Working temperature: 0 ℃~+95 ℃

Working environment temperature: 0 ℃~+50 ℃

Relative humidity:<95%

3. Operating parameters

Mean time between failures:>60000 hours

Design lifespan: 20 years

Working voltage: 220V ± 10%/50Hz

Safe insulation voltage: 5000V

6、 Installation precautions

1. After the installation of the equipment and system pipelines is completed and the debugging is qualified, the power supply (AC 220V/50Hz) on the main distribution box of the equipment is connected, the indicator light on the distribution box is on, and the equipment is running normally.

2. Keep the controller casing dry.

3. The equipment can be installed horizontally or vertically according to the specific situation on site.

4. The net distance between devices should not be less than 1500mm; the net distance between devices and walls should not be less than 1000mm; and a maintenance space of not less than 500mm should be left between devices and their surroundings.

5. The water treated by this device should immediately enter the heated or circulating equipment, and no storage devices should be installed in between.

6. Pipe supports should be installed near the mouth of the equipment inlet and outlet pipelines; A bracket should be installed under valves with a diameter greater than or equal to DN150 that are directly connected to the container mouth.

7. Important parts can be installed in a bypass manner to facilitate equipment maintenance without stopping the machine.

7、 Full process water processor image display

8、 Scope of application

1. Mainly suitable for water quality treatment and control of circulating water, tap water, surface water, groundwater, seawater, swimming pool water, and hot water.

2. Suitable for circulating water, source water, and sewage treatment in petroleum, tire, rubber, chemical, steel, power generation, central air conditioning, heating, ground source heat pumps, and other industrial and mining enterprises.